I am unable to ping my local v6 address on my machine & obviously cannot get my v6 tunnel working. Has this happened to anyone else? Here are some snapshots. :-[
gif0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1280
tunnel inet 10.174.171.129 --> 184.105.253.10
inet6 fe80::426c:8fff:fe56:6b9f%gif0 prefixlen 64 scopeid 0x2
inet6 2001:470:1f0e:c1f::2 --> 2001:470:1f0e:c1f::1 prefixlen 128
nd6 options=1<PERFORMNUD>
Internet6:
Destination Gateway Flags Netif Expire
default 2001:470:1f0e:c1f::1 UGSc gif0
::1 ::1 UHL lo0
2001:470:1f0e:c1f::1 2001:470:1f0e:c1f::2 UHLr gif0
mac~ root# ping 184.105.253.10
PING 184.105.253.10 (184.105.253.10): 56 data bytes
64 bytes from 184.105.253.10: icmp_seq=0 ttl=54 time=47.080 ms
5 packets transmitted, 5 packets received, 0.0% packet loss
mac:~ root# ping6 2001:470:1f0e:c1f::2
PING6(56=40+8+8 bytes) 2001:470:1f0e:c1f::2 --> 2001:470:1f0e:c1f::2
^C
--- 2001:470:1f0e:c1f::2 ping6 statistics ---
5 packets transmitted, 0 packets received, 100.0% packet loss
mac:~ root# ping6 2001:470:1f0e:c1f::1
PING6(56=40+8+8 bytes) 2001:470:1f0e:c1f::2 --> 2001:470:1f0e:c1f::1
^C
--- 2001:470:1f0e:c1f::1 ping6 statistics ---
3 packets transmitted, 0 packets received, 100.0% packet loss
MTU is low, are you sure it's right? (Not that it would affect local pings)
On some versions of BSD I had to use GIF1 instead of GIF0, you may try that.
Hello everyone,
Same problem for me :
gif0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1280
tunnel inet 192.168.1.12 --> 216.66.84.42
inet6 fe80::5ab0:35ff:fefd:925d%gif0 prefixlen 64 scopeid 0x2
inet6 2001:470:1f12:946::2 --> 2001:470:1f12:946::1 prefixlen 128
nd6 options=1<PERFORMNUD>
root# ping6 -I gif0 -c 1 2001:470:1f12:946::1
PING6(56=40+8+8 bytes) 2001:470:1f12:946::2 --> 2001:470:1f12:946::1
--- 2001:470:1f12:946::1 ping6 statistics ---
1 packets transmitted, 0 packets received, 100.0% packet loss
I even unplugged my router Netgear WPN824v2 for a test and configured a DMZ with 192.168.1.12. Impossible to obtain a connectivity with IPv6 and Mac OS X (Maverick).
Only this command does work :
root# ping6 2001:470:1f12:946::2
PING6(56=40+8+8 bytes) 2001:470:1f12:946::2 --> 2001:470:1f12:946::2
16 bytes from 2001:470:1f12:946::2, icmp_seq=0 hlim=64 time=0.083 ms
16 bytes from 2001:470:1f12:946::2, icmp_seq=1 hlim=64 time=0.116 ms
16 bytes from 2001:470:1f12:946::2, icmp_seq=2 hlim=64 time=0.106 ms
16 bytes from 2001:470:1f12:946::2, icmp_seq=3 hlim=64 time=0.131 ms
16 bytes from 2001:470:1f12:946::2, icmp_seq=4 hlim=64 time=0.067 ms
16 bytes from 2001:470:1f12:946::2, icmp_seq=5 hlim=64 time=0.087 ms
^C
--- 2001:470:1f12:946::2 ping6 statistics ---
6 packets transmitted, 6 packets received, 0.0% packet loss
round-trip min/avg/max/std-dev = 0.067/0.098/0.131/0.022 ms
But http://ipv6.whatismyv6.com/ gives me like result "Page Web inaccessible"
error code : DNS_PROBE_FINISHED_NXDOMAIN.
DNS resolution failed.
Thanks in advance.
Valorisa