ping -6 ipv6.google.com working.
ping ipv6.google.com not working.
C:\>netsh int ipv6 show interface
1 50 4294967295 connected Loopback Pseudo-Interface 1
12 50 1280 disconnected isatap.{017C286C-98B5-4835-A37F-72AE55332E60}
24 50 1280 disconnected isatap.{0D0613CB-07C9-45AE-B313-0B27D4716D4A}
11 20 1500 connected Ukrtelecom
20 25 1280 connected IP6Tunnel
14 50 1280 disconnected 6TO4 Adapter
13 20 1500 connected KCT
16 50 1280 disconnected isatap.{0DBCEF11-4E11-4D35-90C2-8F6261B77321}
17 50 1280 disconnected isatap.{F4817326-D0C9-4076-80E5-3B444CA8420C}
23 20 1500 connected VirtualBox Host-Only Network
route print
20 281 ::/0 2001:470:1f0a:1381::1
1 306 ::1/128 On-link
20 281 2001:470:1f0a:1381::/64 On-link
20 281 2001:470:1f0a:1381::2/128
On-link
13 276 2001:16d8:ff6f::254/127 On-link
13 276 2001:16d8:ff6f::254/128 On-link
23 276 fe80::/64 On-link
13 276 fe80::/64 On-link
11 276 fe80::/64 On-link
20 281 fe80::/64 On-link
11 276 fe80::3988:1443:f575:826d/128
On-link
20 281 fe80::6d8e:c67b:ce86:757a/128
On-link
23 276 fe80::79ee:f922:344e:4de6/128
On-link
13 276 fe80::d445:67ef:5620:2c18/128
On-link
1 306 ff00::/8 On-link
23 276 ff00::/8 On-link
13 276 ff00::/8 On-link
11 276 ff00::/8 On-link
20 281 ff00::/8 On-link
nslookup
C:\Users\slava>nslookup
╤хЁтхЁ яю єьюыўрэш■: platon.acs-group.net.ua
Address: 193.33.236.22
> ipv6.google.com
╤хЁтхЁ: platon.acs-group.net.ua
Address: 193.33.236.22
Не заслуживающий доверия ответ:
╚ь : ipv6.l.google.com
Addresses: 2a00:1450:8004::68
2a00:1450:8004::69
2a00:1450:8004::6a
2a00:1450:8004::93
2a00:1450:8004::63
2a00:1450:8004::67
Aliases: ipv6.google.com
>
Have you assigned an address to your local area connection?
2001:16d8:ff6f::254/127 to local network interface.
K. First, you're using a SixXS address with a HE tunnel. You can't do that unless somehow you are doing a BGP tunnel and advertising it through HE, which shouldn't be possible anyway with addy space from SixXS.
Use your routed /64 or allocated a /48 instead.
Second, why a /127? I mean, it's technically OK to use as an IPv6 address, but somewhat frowned upon since it breaks autoconfig. The only real "valid" place to use a /127 would be P-t-P link or possibly a loopback. That interface looks like some bridged virtualbox ethernet or virtio interface. Third, the proper address to assign the interface would be the ::255/127 address anyway, since ::254 would be the "network" address no the host identifier portion of the subnet.
Anyway, you need to use your HE space through your HE tunnel.