Dear all
I would like to IPv6 enable my home network, using a Vigor 2130. I think the router options that might work are TSCP and AICCU, but I don't manage to figure out how to populate the necessary configuration options (other options are "Link Local Only", "Static IPv6", "DHCPv6 Client (IA_NA)", "DHCPv6 Client (IA_PD)"):
TSCP:
User Name
Password
Tunnel Broker
Tunnel mode (options are IPv6-in-IPv4 Tunnel/IPv6-in-IPv4 (Native)/IPv6-in-IPv4 (NAT traversal)
Auto-reconnect Delay
Keepalive
Keepalive Interval
Prefix Length
AICCU:
User Name
Password
Server
Tunnel mode (options are NONE, AYIYA, Heartbeat)
Tunnel ID
For AICCU, I tried all possible tunnel mode options, but the following problem was always logged:
syslog: Couldn't connect to the TIC server 216.66.80.98
Can somebody help? It would be greatly appreciated!
BR, Oliver
You need to use Ipv6 in IPv4 for your tunnel
AICCU is used with SIXXS.
To clarify what cholzhauer said, the Tunnelbroker service does not use AICCU/TSP, so you will not need an AICCU client. To set up a tunnel through Tunnelbroker, you will use 6in4 (IPv6-in-IPv4/protocol 41).