Have the tunnel installed on W7 Pro 64-bit. Seems to be OK. I can ping out to he.net and ipv6.google.com with no problem. I assigned the workstation an IP from my /64 allocation. From the Internet I can ping my FIOS routers public IP and both endpoints of the tunnel. Firewall has been turned off on both the router and the workstation. When I try to ping the /64 IP from the Internet it just times out. I did a 'route print' on the workstation and the paths look OK to the gateway and my workstation. Routing issue?
We're going to need more information....IP addresses, host names, ect
I'm away from my system right now but can you tell me what I should be using for the gateway IP on the adapter?
Depends...on any host behind your router, your default gateway should be the inside interface of the router. On your router, your default gateway should be the ::1 address of your tunnel /64
I'm a little confused. Does this mean that ALL my IPv4 & 6 traffic must now use the tunnel?
No...your IPv4 traffic will be unaffected.
All of your IPv6 traffic would though
Windows 7 does not route packets between interfaces (you'll need W2008 server with Routing and Remote Access configured) so you will not be able to route to your /64. Your host IPv6 address will be your end of the tunnel (ending in ::2) and default route should be the far end of the tunnel, as defined in the sample HE script.
If you want to use your routed /64 or /48 then you will need either a router or an OS that does IPv6 routing.
HTH,
I was pretty sure that RRAS is only needed if you want dynamic routing (RIP or OSPF). Static routing is always supported.
Here's my ipconfig and routing table:
Windows IP Configuration
Host Name . . . . . . . . . . . . : WS7
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : home
Wireless LAN adapter Wireless Network Connection 3:
Connection-specific DNS Suffix . : home
Description . . . . . . . . . . . : Linksys WUSB600N Dual-Band Wireless-N USB
Network Adapter #2
Physical Address. . . . . . . . . : 00-1C-10-EC-30-D6
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:470:8:c31::2(Preferred)
Link-local IPv6 Address . . . . . : fe80::18b8:f661:5918:73f%20(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.3(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Wednesday, December 21, 2011 6:01:42 AM
Lease Expires . . . . . . . . . . : Thursday, December 22, 2011 6:01:42 AM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 385883152
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-EF-EF-56-00-1C-10-EC-30-D6
DNS Servers . . . . . . . . . . . : 192.168.1.1
71.252.0.12
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : 1C-6F-65-CC-9C-57
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter VMware Network Adapter VMnet1:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet
1
Physical Address. . . . . . . . . : 00-50-56-C0-00-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::8904:962d:6155:193c%24(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.175.1(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 369119318
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-EF-EF-56-00-1C-10-EC-30-D6
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter VMware Network Adapter VMnet8:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet
8
Physical Address. . . . . . . . . : 00-50-56-C0-00-08
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::4579:43c9:52c5:12f4%25(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.58.1(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 385896534
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-EF-EF-56-00-1C-10-EC-30-D6
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{7B00BC0D-3FF7-4E61-A93F-34AAE2B4235F}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter IP6Tunnel:
Connection-specific DNS Suffix . : home
Description . . . . . . . . . . . : Microsoft Direct Point-to-point Adapater
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:470:7:c31::2(Preferred)
Link-local IPv6 Address . . . . . : fe80::e0ef:1c7a:c57a:2377%27(Preferred)
Default Gateway . . . . . . . . . : 2001:470:7:c31::1
DNS Servers . . . . . . . . . . . : 192.168.1.1
71.252.0.12
NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter isatap.{3ED2CC55-8496-4FD8-8401-FEE1BB3C4AD3}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #4
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.home:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : home
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #5
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{01AE18EE-4A2A-4FBA-B1F7-AD6B5F8783F8}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #6
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
C:\Users\Dave>route print
===========================================================================
Interface List
20...00 1c 10 ec 30 d6 ......Linksys WUSB600N Dual-Band Wireless-N USB Network
Adapter #2
19...1c 6f 65 cc 9c 57 ......Realtek PCIe GBE Family Controller
24...00 50 56 c0 00 01 ......VMware Virtual Ethernet Adapter for VMnet1
25...00 50 56 c0 00 08 ......VMware Virtual Ethernet Adapter for VMnet8
1...........................Software Loopback Interface 1
16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2
27...00 00 00 00 00 00 00 e0 Microsoft Direct Point-to-point Adapater
15...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #4
28...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #5
26...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #6
===========================================================================
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.3 25
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
192.168.1.0 255.255.255.0 On-link 192.168.1.3 281
192.168.1.3 255.255.255.255 On-link 192.168.1.3 281
192.168.1.255 255.255.255.255 On-link 192.168.1.3 281
192.168.58.0 255.255.255.0 On-link 192.168.58.1 276
192.168.58.1 255.255.255.255 On-link 192.168.58.1 276
192.168.58.255 255.255.255.255 On-link 192.168.58.1 276
192.168.175.0 255.255.255.0 On-link 192.168.175.1 276
192.168.175.1 255.255.255.255 On-link 192.168.175.1 276
192.168.175.255 255.255.255.255 On-link 192.168.175.1 276
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 192.168.175.1 276
224.0.0.0 240.0.0.0 On-link 192.168.58.1 276
224.0.0.0 240.0.0.0 On-link 192.168.1.3 281
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 192.168.175.1 276
255.255.255.255 255.255.255.255 On-link 192.168.58.1 276
255.255.255.255 255.255.255.255 On-link 192.168.1.3 281
===========================================================================
Persistent Routes:
Network Address Netmask Gateway Address Metric
0.0.0.0 0.0.0.0 10.1.1.1 Default
===========================================================================
IPv6 Route Table
===========================================================================
Active Routes:
If Metric Network Destination Gateway
27 261 ::/0 2001:470:7:c31::1
1 306 ::1/128 On-link
27 261 2001:470:7:c31::/64 On-link
27 261 2001:470:7:c31::2/128 On-link
20 281 2001:470:8:c31::/64 On-link
20 281 2001:470:8:c31::2/128 On-link
27 261 fe80::/64 On-link
24 276 fe80::/64 On-link
25 276 fe80::/64 On-link
20 281 fe80::/64 On-link
20 281 fe80::18b8:f661:5918:73f/128
On-link
25 276 fe80::4579:43c9:52c5:12f4/128
On-link
24 276 fe80::8904:962d:6155:193c/128
On-link
27 261 fe80::e0ef:1c7a:c57a:2377/128
On-link
1 306 ff00::/8 On-link
27 261 ff00::/8 On-link
24 276 ff00::/8 On-link
25 276 ff00::/8 On-link
20 281 ff00::/8 On-link
===========================================================================
Persistent Routes:
If Metric Network Destination Gateway
0 4294967295 ::/0 2001:470:7:c31::1
===========================================================================
Quote from: dshirsh on December 21, 2011, 02:10:15 PM
I was pretty sure that RRAS is only needed if you want dynamic routing (RIP or OSPF). Static routing is always supported.
That's what I thought too
I think you're right...there's a routing problem with your /64. I would email ipv6@he.net and see what they can do for you
Also, I would disabled all that isatap stuff on your computer...at the very least it'll make things easier to read
Thanks. BTW, RRAS is required only if you are routing between subnets.
Quote from: dshirsh on December 21, 2011, 02:43:27 PM
Thanks. BTW, RRAS is required only if you are routing between subnets.
As I understood it you were wanting to route between subnets - your tunnel /64 and your routed /64 block(on your wireless LAN adaptor)?
Quote
27 261 ::/0 2001:470:7:c31::1
Looks like your default route points to the tunnel /64 (OK) but I don't see a route anywhere for your routed /64.
Quote
IPv6 Address. . . . . . . . . . . : 2001:470:8:c31::2(Preferred)
I can't see any routes to this one - your routed /64 - in the routing table.
I stand corrected on the routing configuration :-\ apparently there is a registry hack mentioned here (http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/35b00eb7-aa2d-4543-8774-b618da27b6cd/) to enable routing for IPv4, as well as a useful link to MS tcp/ip reference book. (yeah I forgot about the old Windows Internet Connection Sharing...) And as for dynamic routing - they did away with OSPF in 2008 server and left us with RIP v2 :'(
OK, Broque in tech support rechecked my route setting at the top end. Looked fine.
I was sure there was a route listed in the table. If you look below you'll see the /64 and /128 entry for the address as on-link. Do I need some other route specified?
Hmmm...... do I really want to assign the /64 address to my wireless adapter or do I need to add it to the tunnel adapter instead? This should be a rather vanilla scenario but it's got me somewhat frazzled.
Assuming you have two /64's :
2001:470:db8:1234::/64 is your tunnel /64
2001:470:db8:abcd::/64 is your routed /64
The ONLY place 2001:470:db8:1234::/64 is used is on your tunnel interface. 2001:470:db8:1234::1/64 is used on the HE side, and you assign 2001:470:db8:1234::2/64 to the tunnel interface on your side. The default gateway on your tunnel adapter is 2001:470:db8:1234::1/64
You can use 2001:470:db8:abcd::1/64 on your wireless interface. Your default gateway is your tunnel adapter (I don't know if you can route to an interface in Windows or not) (I may have messed that up earlier)
Out of curiousity I went back and rechecked how I did the web server exercise for the cert test. Turns out that I used the IPv6 client endpoint address for the web server address. Worked fine for that exercise as well as the mail server exercise. Why wouldn't HE require the user to make use of their /64 address bank and set up a real IPv6 address? Probably because it's not real feasible.
Am I chasing my tail here? It has to be a routing issue but at what level?
We don't care what IPv6 address you use with the tests (ours, someone else), as long as you use one :)
Solved.
Searched around a found another forum post that looked sort of similar.
Added 2 netsh commands to my config:
netsh interface ipv6 set interface IP6Tunnel forwarding=enabled
netsh interface ipv6 set interface "Wireless Network Connection 3" forwarding=enabled advertise=enabled
Ping now works fine from the Internet.
My wireless adapter is just configured with the IPv6 address, no gateway or DNS specified. IPv4 side has its usual gateway and DNS.
My workstation has VMWare Workstation 8 installed along with 6 Server 2008 VMs. All VMs are bridged. I'm going to see if I can get individual IPv6 addresses from my /64 to function on them as well.
Hope this posting helps others.
OK, for the VMWare VMs it looks like this:
Just set up the IPv6 interface with the allocated /64 address you want to use and for the gateway address just use the /64 address of the host that has the tunnel defined. That's it.
Nice.......
My VMs are using BRIDGED network connections.