Print Page - Just a question about NAT's

Title: Just a question about NAT's
Post by: niekwest181 on August 16, 2012, 05:07:12 AM

Took me a long time to find out that I needed to skip my NAT, but I'm connected now with te HE tunnel. But offcourse now I dont have my home network running. Does anyone know of gigabit NAT's that supports protocol 41 or 6to4??? There must be users who can work with the tunnel behind a NAT.....

Thnks in advance..

Title: Re: Just a question about NAT's
Post by: cholzhauer on August 16, 2012, 07:30:14 AM

I'm confused....are you looking for a firewall that passes protocol 41? Running your IPv6 tunnel shouldn't break anything in your home network

Title: Re: Just a question about NAT's
Post by: niekwest181 on August 16, 2012, 08:35:15 AM

Thnks for your confusion so to speak. After a lot of googling I found out that a lot NAT/routers passes 6to4 even when the firewall is turned off, which happend to be my case. However most likely many of you may well have a connection working behind a NAT/router an I would like to know what brand?

again thanks

Title: Re: Just a question about NAT's
Post by: niekwest181 on August 16, 2012, 08:36:56 AM

sorry did meen doesn't passes

Title: Re: Just a question about NAT's
Post by: cholzhauer on August 16, 2012, 08:45:41 AM

http://www.newegg.com/Product/Product.aspx?Item=N82E16833127215

You can host the tunnel on that router

Title: Re: Just a question about NAT's
Post by: niekwest181 on August 16, 2012, 10:39:08 AM

Thank you good sir. I buy that one soonest

Hurricane Electric's IPv6 Tunnel Broker Forums

General IPv6 Topics => IPv6 on Windows => Topic started by: niekwest181 on August 16, 2012, 05:07:12 AM