acl dns_slaves {
// he.net
// https://dns.he.net/
// NOTE: transfer is "slave.dns.he.net" and NOT the nameservers
216.218.133.2;
2001:470:600::2;
...
}
options {
...
notify yes;
allow-transfer { dns_slaves; };
...
}
$TTL 1D
$ORIGIN <mydomain>.com.
@ IN SOA ns1 hostmaster (
...
)
...
IN NS ns1
IN NS ns2
IN NS ns1.he.net.
IN NS ns2.he.net.
IN NS ns3.he.net.
IN NS ns4.he.net.
IN NS ns5.he.net.
...
netsh interface teredo set state disabled
netsh interface ipv6 add v6v4tunnel interface=IP6Tunnel localaddress=198.92.24.79 remoteaddress=216.67.22.91
netsh interface ipv6 add address interface=IP6Tunnel address=2001:470:30:48b::2
netsh interface ipv6 add route prefix=::/0 interface=IP6Tunnel nexthop=2001:470:30:48b::1
netsh interface ipv6 add v6v4tunnel interface="IP6Tunnel" localaddress=198.92.24.79 remoteaddress=216.67.22.91
But at the same time it gives out this error. How to correct this?/interface 6to4 add comment="Hurricane Electric IPv6 Tunnel Broker" disabled=no local-address=1xx.xxx.xxx.xx0 mtu=1280 name=sit1 remote-address=216.218.221.42
/ipv6 route add comment="" disabled=no distance=1 dst-address=2000::/3 gateway=2001:470:35:30c::1 scope=30 target-scope=10
/ipv6 address add address=2001:470:35:30c::2/64 advertise=no disabled=no eui-64=no interface=sit1
/interface 6to4 add comment="Hurricane Electric IPv6 Tunnel Broker" disabled=no local-address=1xx.xxx.xxx.xx0 mtu=1280 name=sit1 remote-address=216.218.221.42
/ipv6 route add comment="" disabled=no distance=15 dst-address=2000::/3 gateway=2001:470:35:30c::1 scope=30 target-scope=10
/ipv6 address add address=2001:470:35:30c::2/64 advertise=no disabled=no eui-64=no interface=sit1
/ipv6 route add comment="" disabled=no distance=15 dst-address=2000::/3 gateway=2001:470:35:30c::1 scope=30 target-scope=10