Print Page - setting up DynDNS with dd-wrt

Title: setting up DynDNS with dd-wrt
Post by: Mangix on July 06, 2011, 10:01:37 AM

i'm trying to use dd-wrt's DynDNS service to update my IP on HE's DNS service. this is the current setup i have right now that doesn't work.

http://imageshack.us/f/402/unledqxk.png/

any thoughts on how i can fix it? i've never used DynDNS before.

Title: Re: setting up DynDNS with dd-wrt
Post by: ratcheer on July 06, 2011, 11:48:36 AM

There are some scripts on the dd-wrt wiki. I have never tried them because I have a static IP address.

http://www.dd-wrt.com/wiki/index.php/IPv6#Hurricane_Electric.27s_Tunnelbroker.net

Tim

Title: Re: setting up DynDNS with dd-wrt
Post by: Mangix on July 07, 2011, 03:32:48 PM

i got it working.

now if i could only get something similar for tunnelbroker...

Title: Re: setting up DynDNS with dd-wrt
Post by: jrocha on July 07, 2011, 03:38:33 PM

Quote from: Mangix on July 07, 2011, 03:32:48 PM
i got it working.

now if i could only get something similar for tunnelbroker...

Check out the link that ratcheer posted, it should provide you with some helpful directions for setting up ddwrt to automatically update your endpoint in TunnelBroker. Specifically, this script: http://fcartegnie.free.fr/articles/Hurricane's%20IPv6%20TunnelBroker%20Endpoint%20ipv4%20address%20updater.html

Title: Re: setting up DynDNS with dd-wrt
Post by: Mangix on July 17, 2011, 03:40:07 PM

too bad i'm running the micro build of dd-wrt which is missing plenty of busybox functionality as well as native ipv6 support. so my feeling is that that script will not work.

Hurricane Electric's IPv6 Tunnel Broker Forums

General IPv6 Topics => IPv6 on Routing Platforms => Topic started by: Mangix on July 06, 2011, 10:01:37 AM