Cant get my tunnel to work..... can any1 see whats my problem is?
In my router, WNDR3700 i have select pass through on ipv6.
settings om my wifi card is dynamic.
Tunnel details
Server IPv4 Address:216.66.80.90
Server IPv6 Address:2001:470:27:30e::1/64
Client IPv4 Address:x.x.x.x
Client IPv6 Address:2001:470:27:30e::2/64
Routed /64:2001:470:28:30e::/64
I Can ping Server IPv6 Address:2001:470:27:30e::2
But not Client IPv6 Address:2001:470:27:30e::1
here is my ipconfig.
Wireless LAN adapter LAN:
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : 2001:470:28:30e:9980:298b:acca:be7
Temporary IPv6 Address. . . . . . : 2001:470:28:30e:3c1f:5a9:8c73:33c3
Link-local IPv6 Address . . . . . : fe80::9980:298b:acca:be7%12
IPv4 Address. . . . . . . . . . . : 192.168.1.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : ::
192.168.1.1
Tunnel adapter IP6Tunnel:
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : 2001:470:27:30e::2
Link-local IPv6 Address . . . . . : fe80::c1b8:5ee4:73a8:
Default Gateway . . . . . . . . . : 2001:470:27:30e::1
If i try ping google i get destination host unreachable
What commands did you enter into windows to build the tunnel?
add v6v4tunnel IP6Tunnel 192.168.1.2 216.66.80.90
add address IP6Tunnel 2001:470:27:30e::1
set interface IP6Tunnel forwarding=enabled
set interface "Lan" forwarding=enabled advertise=enabled
set route 2001:470:28:30e::/64 "Lan" publish=yes
add route ::/0 IP6Tunnel 2001:470:27:30e::1 publish=yes
was following http://www.tunnelbroker.net/forums/index.php?topic=1439.0
since i didnt it get to work with the router...
Quoteadd address IP6Tunnel 2001:470:27:30e::1
Not the ::2 address? Shouldn't this be the IPv6 address of YOUR side of the tunnel?