Print Page - Setting up IPv6 Tunnel on Draytek 2710n

Title: Setting up IPv6 Tunnel on Draytek 2710n
Post by: mikeybob on July 21, 2010, 02:09:12 PM

Hello,

I'm trying to setup an IPv6 tunnel on my Draytek 2710n router using the latest version of firmware. Has anyone had any success doing this? The tunnel broker setup just tells me that ICMP may be blocked, but this is not the case.

Cheers for any help,
Mike

Title: Re: Setting up IPv6 Tunnel on Draytek 2710n
Post by: broquea on July 21, 2010, 02:17:25 PM

If your IPv4 endpoint is the address you posted from:

5 packets transmitted, 0 received, 100% packet loss, time 4000ms

Is there an option like "enable wan ping" in it's configuration? I haven't found a manual for it yet.

Title: Re: Setting up IPv6 Tunnel on Draytek 2710n
Post by: cholzhauer on July 22, 2010, 04:58:32 AM

What about moving the machine to the DMZ? (If there's a DMZ function)

Title: Re: Setting up IPv6 Tunnel on Draytek 2710n
Post by: tufinhas on July 22, 2010, 10:48:38 AM

System Maintenance >> Management

Disable PING from the Internet

http://www.draytek.com.tw/.upload/Demo/Vigor2710%20V3.3.2/acontrol.sht.htm

Hurricane Electric's IPv6 Tunnel Broker Forums

General IPv6 Topics => IPv6 on Routing Platforms => Topic started by: mikeybob on July 21, 2010, 02:09:12 PM