Hi. Im running a tunnel via my dd-wrt router which holds the tunnel. Now auto assigned addresses works perfectly but i want to assign a static ip for a server.
Heres my interface config:
# The primary network interface
allow-hotplug eth0
iface eth0 inet static
address 192.168.1.3
netmask 255.255.255.0
gateway 192.168.1.1
network 192.168.1.0
broadcast 192.168.1.255
# IPV6
iface eth0 inet6 static
address 2001:470:27:cfa::3
netmask 64
gateway 2001:470:27:cfa::2
gateway is my client ipv6 address. I have tried to use server ipv6 address here also which is 2001:470:27:cfa::1.
I cant ping my gateway or HE server ipv6. Routing table is:
2001:470:27:cfa::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295
fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295
default via 2001:470:27:cfa::2 dev eth0 metric 1 mtu 1500 advmss 1440 hoplimit 4294967295
Im pretty sure it's a routing issue. So my question is how should i set up routing for the clients properly? Appreciate any help :)
I dont see your tunnel interface.
My tunnel interface is on the router which is working fine with dynamic clients. I put a ifconfig from the router here http://pastebin.com/2feUxvWp
2001:470:27:cfa::/64 is your HE tunnel's allocation. Try using the statically routed /64.
Doh, thanks for pointing that out. Didnt think of it even tho it's in bold.