Hi;
this is my tunnel configuratio:
netsh interface teredo set state disabled
netsh interface ipv6 add v6v4tunnel IP6Tunnel 41.141.181.101 216.66.80.30
netsh interface ipv6 add address IP6Tunnel 2001:470:1f0a:54d::2
netsh interface ipv6 add route ::/0 IP6Tunnel 2001:470:1f0a:54d::1
i tried the ping of server address 2001:470:1f0a:54d::1 dose not working
also the ping of ipv6.google.com
i'm connected by wifi connexionof the company, so my host behind a firewall pix 515E which is linked to internet router
thank you for your help
Is the 515e passing you protocol41? Is it doing nat? Because if so, you need to change the commands you entered to reflect your nat address
pix 515E is a firewall on which I authorized the port 41 and the nat is configured on the router connected to the Internet
this pix is behind this router
Ok two problems.
1) protocol != port. You cannot forward a speccific protocol on a pix or asa.
2) youre behind a nat but you used your public ip address to create the tunnel. Remove the tunnel and recreate it using the nat ip address in place of the public one
please how i can remove the tunnel, my be i will have address conflict because it is already used
and what address of nat : you mean the private address of the router that is configured the nat
thank you
Its whatever the syntax is to delete an interface in windows...google can help you with that
You need to use whatever IP address is assigned...if you provide the output of ipconfig I can tell you