Text only | Text with Images

Hurricane Electric's IPv6 Tunnel Broker Forums

General IPv6 Topics => IPv6 on Routing Platforms => Topic started by: azerbinati on June 20, 2012, 09:08:57 AM

Title: ipv6 tunnel on Cisco RV042, is it possible?
Post by: azerbinati on June 20, 2012, 09:08:57 AM
Hello everybody,
i've try to do some research,  but i did not find any answer: is it possible to configure a Cisco RV042 to do Ipv6 tunnelling with HE?

I have static IPv4 on WAN1 (and dinamic on WAN2) but no native IPv6 by ISP.

Thanks in advance!
Title: Re: ipv6 tunnel on Cisco RV042, is it possible?
Post by: broquea on June 20, 2012, 09:24:54 AM
Product info doesn't even list IPv6, so probably not. You might be able to run the tunnel to something behind it, if it allows Protocol 41 through.
Title: Re: ipv6 tunnel on Cisco RV042, is it possible?
Post by: azerbinati on June 20, 2012, 10:44:37 AM
Actually, the product is IPv6 enabled and also offer 6to4 Tunnelling, but all i can found is about how to configure the RV042 to tunnel through a Cisco RV220 (here the link http://www.cisco.com/en/US/docs/routers/csbr/app_notes/RV0xx-RV220W_IPv6_AN_OL-25493.pdf (http://www.cisco.com/en/US/docs/routers/csbr/app_notes/RV0xx-RV220W_IPv6_AN_OL-25493.pdf))

RV042 firmware seams very closed to advanced configurations... I'm about to give up, I was hoping someone knew about RV042 and had already succeeded in setting up.

Thank you anyway!
Text only | Text with Images