ok.. i've tried a number of different configs. but can't seem to get it to work.. I'm hoping there are some tayga users out there who mind lend a hand
(all numbers changed to protect the innocent ... )
have a router to the internet
65.113.x.100 (ISP)
2001:428:5000:x::2 (ISP)
router
65.114.x.201 (publicly routeable)
2001:428:5003:d::1 /64
|
|
65.114.x.204 (publicly routeable)
2001:428:5003:d::3 /64 (publicly routeable)
eth0.6
linux, running totd, tayga, radvd, dhcpv6
eth1.62
2001:428:5003:e::3 /64 (publicly routeable)
192.168.11.9 (private)
|
|
ipv6 only network, all nodes having publicly routable ipv6 addresses, with no ipv4 address on the interface
i'm assuming i'll be using the 2001:428:5003:e:: /64 network to farm out the addresses,
using the prefix 2001:428:5003:e:eeee::/96
so the totd file would look like
forwarder 4.2.2.2 port 53
prefix 2001:428:5003:e:eeee::
port 53
my tayga file
tun-device nat64
ipv4-addr 192.168.11.200
ipv6-addr 2001:428:5003:e:aaaa::1
prefix 2001:428:5003:e:eeee::/96
dynamic-pool 192.168.11.0/24
data-dir /var/spool/tayga
my iptables setup would be
iptables -F
iptables -t nat -A POSTROUTING -o eth0.6 -j MASQUERADE
iptables -A FORWARD -i eth0.6 -o nat64 -m state --state RELATED,ESTABLISHED -j ACCEPT
iptables -A FORWARD -i nat64 -o eth0.6 -j ACCEPT
to start up tayga is
tayga --mktun
ip link set nat64 up
ip addr add 65.114.x.204 dev nat64
ip addr add 2001:428:5003:d::1 dev nat64
ip route add 192.168.11.0/24 dev nat64
ip route add 2001:428:5003:e:eeee::/96 dev nat64
tayga -d
i'm sure i'm messing something up in the configs above.
thanks if anyone can help
yes!! i was doing something wrong.. i was using the same ipv4 pool as the inside private network (192.168.11.x)
i changed that to 192.168.12.x and all is working!!!!
jim