Text only | Text with Images

Hurricane Electric's IPv6 Tunnel Broker Forums

General IPv6 Topics => IPv6 on Linux & BSD & Mac => Topic started by: csscss on August 23, 2012, 12:27:03 PM

Title: HE tunnel on synology DS211J
Post by: csscss on August 23, 2012, 12:27:03 PM
I've tried to set-up a HE tunnel on my DS211J with no luck. I used àuto settig and also tried manual configuration with the ::2 address I got from HE. both with no luck. What do I do wrong? Is there some code I can just run using putty?

Many thanks in advance.
Title: Re: HE tunnel on synology DS211J
Post by: cholzhauer on August 23, 2012, 12:32:06 PM
You used the ::2 address from the tunnel /64 right?  What other settings are there?
Title: Re: HE tunnel on synology DS211J
Post by: csscss on August 23, 2012, 01:03:20 PM
Correct, and the ::1 as the default gateway. I also forwarded port 41. I enabled the tunnel using 216.66.86.114 as the server adress. tried both with anonymously or with my HE account. Both with no results.

Title: Re: HE tunnel on synology DS211J
Post by: cholzhauer on August 23, 2012, 01:06:01 PM
Remember that port 41 =! protocol 41...
Title: Re: HE tunnel on synology DS211J
Post by: csscss on September 01, 2012, 05:52:12 AM
Sorry but still no luck. Any ideas on what to do?

Title: Re: HE tunnel on synology DS211J
Post by: cholzhauer on September 01, 2012, 02:48:22 PM
Does it actually support 6to4 tunnels?
Title: Re: HE tunnel on synology DS211J
Post by: csscss on September 02, 2012, 09:47:05 AM
Yes tunneling is supported by synology
Text only | Text with Images