Hurricane Electric's IPv6 Tunnel Broker Forums

General IPv6 Topics => IPv6 on Routing Platforms => Topic started by: asherp1981 on November 20, 2012, 09:45:52 PM

Title: D-Link DIR-615 (regular FW - not dd-wrt)
Post by: asherp1981 on November 20, 2012, 09:45:52 PM
Hi guys.

I have DIR-615 router that I tried to configure for this service but I cant...
my network is:
192.168.0.100 - my PC
192.168.0.1 - my router

I used the example on site when 192.168.0.100 is the ip of my pc:

netsh interface teredo set state disabled
netsh interface ipv6 add v6v4tunnel IP6Tunnel 192.168.0.100 209.51.161.58
netsh interface ipv6 add address IP6Tunnel 2001:470:4:cca::2
netsh interface ipv6 add route ::/0 IP6Tunnel 2001:470:4:cca::1


But it not working...
When I'm connecting the PC direct to Modem it working Perfect.

Where is my problem?
Thanks all :)
Title: Re: D-Link DIR-615 (regular FW - not dd-wrt)
Post by: cholzhauer on November 21, 2012, 01:32:05 PM
The 615 supports a 6in4 tunnel...why not put the tunnel on the router?
Title: Re: D-Link DIR-615 (regular FW - not dd-wrt)
Post by: snarked on November 22, 2012, 11:20:00 AM
Agreed.  I terminate my home tunnel in the 615 as well.  There's no reason not to.