Howdy
I rent a my modem from my ISP (Primus). I've connect my tunnel using FreeBSD but would rather set up my modem. I've tried different configurations with some success.
The modem has a configuration for ipv6inipv4 like this.()
IPv4 Mask Length 24
6rd Prefix 2001:470:xxxx::/48
Border Relay Address 216.66.38.58
----------------------------------------
And another configuration page for Ethernet config Lan ipv6 Autoconfig
Static LAN IPv6 Address Configuration
Interface Address (prefix length is required): 2001:470:xx:xxx::2/64
IPv6 LAN Applications
Enabled DHCPv6 Server yes
Enabled Stateless yes
Enabled RADVD yes
------------------------------------------
The router hands out ipv6 address but when using:
Routed 2001:470:xx:xxx::/64 the modem doesn't hand out ipv6 addresses
---------------------------------------
Is there any other configurations I should do? routing maybe? Because there's no auto ipv6 connection yet.
That top section mentions 6rd.
6rd != 6in4
Is 6rd not OK ?
HE is giving you a 6in4 tunnel, not 6rd.