Hurricane Electric's IPv6 Tunnel Broker Forums

General IPv6 Topics => IPv6 on Routing Platforms => Topic started by: chandro on September 20, 2015, 09:12:51 PM

Title: [HELP] someone was able to configure a tunnel from here to an ARRIS TG862G
Post by: chandro on September 20, 2015, 09:12:51 PM
 :o

i have filled all the data, but still getting on my network info

"no internet access"
Title: Re: [HELP] someone was able to configure a tunnel from here to an ARRIS TG862G
Post by: cholzhauer on September 21, 2015, 05:01:24 AM
If you give us some more information (screen shots, info) we might be able to help
Title: Re: [HELP] someone was able to configure a tunnel from here to an ARRIS TG862G
Post by: chandro on September 21, 2015, 04:27:05 PM
Hello, this are my ips and my config on ARRIS cable modem

(http://s30.postimg.org/oatct07gt/config_internet.jpg) (http://postimg.org/image/oatct07gt/)

with that config my network adapter show this.

(http://s26.postimg.org/z1qsi5r51/internet_config2.jpg) (http://postimg.org/image/z1qsi5r51/)

what is wrong?
Title: Re: [HELP] someone was able to configure a tunnel from here to an ARRIS TG862G
Post by: cholzhauer on September 22, 2015, 05:14:28 AM
I can't get the site you linked to load.

Can you just attach it to the post?
Title: Re: [HELP] someone was able to configure a tunnel from here to an ARRIS TG862G
Post by: chandro on September 22, 2015, 03:20:35 PM
im getting this error

Cannot access attachments upload path!

check image here

http://imagebin.ca/v/2GZUxx1SmAMg
and
http://imagebin.ca/v/2GZV6Nfww7IU
Title: Re: [HELP] someone was able to configure a tunnel from here to an ARRIS TG862G
Post by: cholzhauer on September 22, 2015, 03:21:46 PM
It's as I suspected...your device doesn't do a tunnel, it just supports native IPv6 access