Text only | Text with Images

Hurricane Electric's IPv6 Tunnel Broker Forums

Tunnelbroker.net Specific Topics => Questions & Answers => Topic started by: jschv6 on July 02, 2018, 07:32:06 AM

Title: IPv6 Tunnel without public IPv4
Post by: jschv6 on July 02, 2018, 07:32:06 AM
Hello,

since I last moved, I only have internet access using LTE where I get a internal IPv4 address (Carrier grade NAT) that is not externally reachable.
Is there any way to use an IPv6 tunnel with that restrictions?
Title: Re: IPv6 Tunnel without public IPv4
Post by: cholzhauer on July 02, 2018, 12:16:14 PM
With HE, your endpoint needs to be public and ping-able
Title: Re: IPv6 Tunnel without public IPv4
Post by: andrev on July 23, 2018, 09:31:56 AM
just pingable or some ports need to be opened?
Title: Re: IPv6 Tunnel without public IPv4
Post by: cholzhauer on July 23, 2018, 10:02:58 AM
It needs to pass protocol 41
Title: Re: IPv6 Tunnel without public IPv4
Post by: TemiD on December 04, 2018, 07:58:09 PM
You could VPN to a VPS, then do the tunnel from there. At that point the VPS would probably have an ipv6 address, so you could manually setup some tunnelbroker config on the VPS.
Text only | Text with Images