Print Page - Very important Cisco command

Title: Very important Cisco command
Post by: broquea on July 29, 2009, 07:58:16 PM

ipv6 unicast-routing

I'm noticing a number of Cisco users that try to use their routed /64 or /48 on an interface, and can't seem to get connectivity to their LAN hosts.

Title: Re: Very important Cisco command
Post by: rmis on February 22, 2012, 03:00:26 AM

This should be made sticky.. would have saved me 2 days..

Title: Re: Very important Cisco command
Post by: kcochran on March 02, 2012, 08:54:35 AM

Added a note about that to the IOS example configuration.

Title: Re: Very important Cisco command
Post by: antillie on March 17, 2012, 11:37:40 AM

no ipv6 source-route
ipv6 cef

Although not strictly required these are also very useful and should be on every IPv6 enabled internet facing IOS router in my opinion.

Title: Re: Very important Cisco command
Post by: RedShift2 on May 01, 2012, 06:12:58 AM

Quote from: antillie on March 17, 2012, 11:37:40 AM
no ipv6 source-route
ipv6 cef

Although not strictly required these are also very useful and should be on every IPv6 enabled internet facing IOS router in my opinion.

Using IPv6 CEF breaks IPv6 via PPTP (1811 15.1(2)T)

Title: Re: Very important Cisco command
Post by: antillie on July 23, 2012, 08:51:22 AM

Have you tried it on a stable release?

Hurricane Electric's IPv6 Tunnel Broker Forums

General IPv6 Topics => IPv6 on Routing Platforms => Topic started by: broquea on July 29, 2009, 07:58:16 PM