can someone help me setup my ipv6 i tried buti don't think I'm doing it right
Please detail what you've tried, what failed, and relevant error messages. Providing details will help troubleshoot problems, thanks.
I'm using a dlink dir-615 router. for some reason i seem to connect better with it more stable.
The setting I have currently for the ipv6 is the dhcp mode for it.
what i dont get is my ipv6 still shows up as local under my network connections.
I've set up tunnel broker. I just dont know how to use it with my internet.
i am still having a hard time figuring out what you need help with. Are you saying you need help connecting to the ipv6 internet? What have you tried so far? How are you distributing addresses?
when i do the first netsh command i get a message stating : YOu were not connected because a duplcate name exists on the network. If joining a domain, go to system control panel to change the computer name and try again, If joining a workgroup, choose another work group name.
I'm using a dlink 615 router
I think I'm distributing the addresses right. not sure
Ive neve rset one of these up before.
QuoteYOu were not connected because a duplcate name exists on the network.
you should probably fix that first. Go to System in Control Panel to change the computer name and try again
Can you list the Netsh commands you're trying?
These are the commands.
netsh interface ipv6 add v6v4tunnel IP6Tunnel
netsh interface ipv6 add address
netsh interface ipv6 add route
Alright, what values are you using for the last two lines?
What ranges did HE assign?
Can you post your routing table and the output if ipconfig /all
How do post the info from a ipconfig /all? I cant copy and paste it here
OhI got my modem to work, but now I'm trying to configure my router. It's a D-Link 615
got it
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Administrator.Tice-PC>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Tice-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast Ethernet
NIC
Physical Address. . . . . . . . . : 00-1E-90-7A-F6-00
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2002:47e6:51e5:b:1da5:b802:b7c3:ea51(Pref
erred)
Site-local IPv6 Address . . . . . : fec0::b:1da5:b802:b7c3:ea51%2(Preferred)
Temporary IPv6 Address. . . . . . : 2002:47e6:51e5:b:25cb:687b:da7a:66a7(Pref
erred)
Link-local IPv6 Address . . . . . : fe80::1da5:b802:b7c3:ea51%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.0.100(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Monday, November 23, 2009 3:04:15 PM
Lease Expires . . . . . . . . . . : Monday, November 30, 2009 3:04:15 PM
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
DHCPv6 IAID . . . . . . . . . . . : 234888848
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-11-F0-27-11-00-1E-90-7A-F6-00
DNS Servers . . . . . . . . . . . : 2001:470:20::2
192.168.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Local Area Connection* 18:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 7:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 02-00-54-55-4E-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e50:20bc:1cd5:b819:b7c9(Pref
erred)
Link-local IPv6 Address . . . . . : fe80::20bc:1cd5:b819:b7c9%8(Preferred)
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter Local Area Connection* 19:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : 6TO4 Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter IP6Tunnel:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Direct Point-to-point Adapater
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
C:\Users\Administrator.Tice-PC>
What are you trying to do with your dlink? From what I can tell, it does not support IPv6
I would turn off teredo
netsh interface teredo set state disabled
it has a settings for ipv6 specifically
I read on another forum a guy set his up with the same router through SixXs
ok i disabled teredo now what do i do
I'm still really not sure what you want to do. You mention setting up IPv6 on your Dlink, but then you post commands setting up a tunnel on windows. You don't need to do both, only one.
If your Dlink supports tunnels as you say it does, you're best to use that; I can not find any reference online how to do that though
how do i remove the tunnel commands on windows?
Take a look at this
http://msdn.microsoft.com/en-us/library/bb736546%28VS.85%29.aspx
netsh interface ipv6 reset