Text only | Text with Images

Hurricane Electric's IPv6 Tunnel Broker Forums

Tunnelbroker.net Specific Topics => Questions & Answers => Topic started by: richspeeds on April 29, 2010, 09:40:25 PM

Title: configuring dlink router for 6to4 tunnel
Post by: richspeeds on April 29, 2010, 09:40:25 PM
im am getting client ipv6 addres must be in hex? it is isnt it? 2001:470:c:4ea::2/64
Title: Re: configuring dlink router for 6to4 tunnel
Post by: broquea on April 29, 2010, 11:22:20 PM
That would be your side of the tunnel's point to point allocation, and yes that is in hexadecimal.
Title: Re: configuring dlink router for 6to4 tunnel
Post by: richspeeds on April 30, 2010, 11:33:36 AM
my router is giving me a ''must be in hex format error message''
Title: Re: configuring dlink router for 6to4 tunnel
Post by: broquea on April 30, 2010, 11:39:30 AM
Perhaps it automagically expects a /64 prefix, try not using the /64
Text only | Text with Images