Hurricane Electric's IPv6 Tunnel Broker Forums

Advanced search  

News:

Welcome to Hurricane Electric's Tunnelbroker.net forums!

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - cholzhauer

Pages: [1] 2 3 ... 175
1
Someone else had a post on here that dealt with their inability to connect to Windows Update while using IPv6.  I didn't look for it, but it shouldn't be too hard to find.  You may find the solution to your problem in there (I don't remember the outcome of the post)

2
The tunnel wasn't created because HE was unable to ping your IPv4 address.  Can you confirm that the 66.x address was actually assigned to you and not to a large CGN?

3
2002 is 6to4, not 6in4, so that's probably why it won't work

If it were mine, I would disable what you have on the router and pass it through to something else

4
IPv6 on Routing Platforms / Re: No internet over ipv6, pings ipv6 google.
« on: December 30, 2017, 08:34:17 AM »
You can at least try it and see if your router is passing protocol 41 traffic

5
The second code snip you used was better because you used your nat address.

You should delete both tunnels and try again, only make it ip6tunnel

6
IPv6 on Routing Platforms / Re: No internet over ipv6, pings ipv6 google.
« on: December 28, 2017, 07:08:25 PM »
Did you hear back?

7
Questions & Answers / Re: IPv6 google ping problem
« on: December 28, 2017, 07:07:13 PM »
Please post:

Commands to create tunnel
Output of ipconfig

8
IPv6 on Routing Platforms / Re: No internet over ipv6, pings ipv6 google.
« on: December 22, 2017, 05:51:44 AM »
Not on my side, I don't work for HE.

You can try ipv6@he.net

9
What is your end goal?  Windows Server can handle DHCPv6 without issue.  However, your clients need to request it, and anything Windows before Windows 8 *won't* unless you tell it to.

10
I have not seen any one posting about Dallas issues.

What are you using for your tunnel now?

I block proto41 at my place of employment; I don't want anyone else setting up tunnels, so your current employer might want to look into that.

Beyond that, you could try changing tunnel servers or firing up wireshark to see what's going on

11
IPv6 on Routing Platforms / Re: No internet over ipv6, pings ipv6 google.
« on: December 19, 2017, 07:17:33 PM »
I didn't look at your pictures...I got as far as where you typed "port" and stopped reading

Keep in mind that port != protocol, they're different.  You can try putting your host in a DMZ, but that doesn't always work.

12
IPv6 on Routing Platforms / Re: No internet over ipv6, pings ipv6 google.
« on: December 19, 2017, 10:59:50 AM »
Sounds like you have a firewall issue, what is your firewall?

13
Well, that's more than I knew before

Can you ping an ipv6 site and get a reply?  If not, your tunnel isn't up

Make sure your isp isn't blocking protocol41, make sure your router isn't blocking it, and make sure that if you have an rfc1918 address that you followed the instructions and altered the commands you used to create the tunnel

14
You've told me your tunnel works, so I'm not sure what I would be looking for.

We need details, without them, we can't help.

15
I have some, but I don't know which are valid because you didn't say which specific test you failed.

Pages: [1] 2 3 ... 175