Need Some Help

flyinonice · December 26, 2012, 12:27:20 AM

Hello all,
I am currently on Windows 7 Ultimate 64bit. I signed up for a tunnel and can't seem to get it to work. I am behind a Belkin F5D8233-4v3 router with the ICMP ping block turned off. The example config online showed the following items to be put into the command prompt, which I have already done (the 192.168.2.2 is my second attempt, the first attempt had my actual public IP not the one the router assigned me. Neither have worked):
netsh interface teredo set state disabled
netsh interface ipv6 add v6v4tunnel IP6Tunnel 192.168.2.2 66.220.18.42
netsh interface ipv6 add address IP6Tunnel 2001:470:c:2e1::2
netsh interface ipv6 add route ::/0 IP6Tunnel 2001:470:c:2e1::1

Below is my ipconfig /all
Microsoft Windows [Version 6.1.7601]
Host Name . . . . . . . . . . . . : John-THINK
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : Belkin

Ethernet adapter Local Area Connection* 17:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Juniper Network Connect Virtual Adapter
Physical Address. . . . . . . . . : 00-FF-B0-5B-6A-06
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . : Belkin
Description . . . . . . . . . . . : 1x1 11b/g/n Wireless LAN PCI Express Half
Mini Card Adapter
Physical Address. . . . . . . . . : D0-DF-9A-72-D1-DE
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::a40e:4a55:1e9a:44ce%15(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.2.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Wednesday, December 26, 2012 12:17:00 AM
Lease Expires . . . . . . . . . . : Saturday, February 01, 2149 7:52:31 AM
Default Gateway . . . . . . . . . : 192.168.2.1
DHCP Server . . . . . . . . . . . : 192.168.2.1
DHCPv6 IAID . . . . . . . . . . . : 382787482
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-C5-D3-23-F0-DE-F1-78-07-F5

DNS Servers . . . . . . . . . . . : 192.168.2.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.{62396AA6-B62A-4BC7-9DE0-80E150D3CF74}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter isatap.Belkin:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : Belkin
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter IP6Tunnel:

Connection-specific DNS Suffix . : Belkin
Description . . . . . . . . . . . : Microsoft Direct Point-to-point Adapater
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:470:c:2e1::2(Preferred)
Link-local IPv6 Address . . . . . : fe80::8da9:bea1:a5ee:af11%16(Preferred)
Default Gateway . . . . . . . . . : 2001:470:c:2e1::1
DNS Servers . . . . . . . . . . . : 192.168.2.1
NetBIOS over Tcpip. . . . . . . . : Disabled

Below is my route print
===========================================================================
Interface List
25...00 ff b0 5b 6a 06 ......Juniper Network Connect Virtual Adapter
15...d0 df 9a 72 d1 de ......1x1 11b/g/n Wireless LAN PCI Express Half Mini
d Adapter
1...........................Software Loopback Interface 1
26...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter
27...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2
16...00 00 00 00 00 00 00 e0 Microsoft Direct Point-to-point Adapater
===========================================================================

IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.2.1 192.168.2.2 25
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
169.254.0.0 255.255.0.0 On-link 192.168.2.2 306
169.254.255.255 255.255.255.255 On-link 192.168.2.2 281
192.168.2.0 255.255.255.0 On-link 192.168.2.2 281
192.168.2.2 255.255.255.255 On-link 192.168.2.2 281
192.168.2.255 255.255.255.255 On-link 192.168.2.2 281
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 192.168.2.2 281
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 192.168.2.2 281
===========================================================================
Persistent Routes:
Network Address Netmask Gateway Address Metric
169.254.0.0 255.255.0.0 192.168.1.18 1
===========================================================================

IPv6 Route Table
===========================================================================
Active Routes:
If Metric Network Destination Gateway
16 286 ::/0 2001:470:c:2e1::1
1 306 ::1/128 On-link
16 286 2001:470:c:2e1::/64 On-link
16 286 2001:470:c:2e1::2/128 On-link
15 281 fe80::/64 On-link
16 286 fe80::/64 On-link
16 286 fe80::8da9:bea1:a5ee:af11/128
On-link
15 281 fe80::a40e:4a55:1e9a:44ce/128
On-link
1 306 ff00::/8 On-link
15 281 ff00::/8 On-link
16 286 ff00::/8 On-link
===========================================================================
Persistent Routes:
If Metric Network Destination Gateway
0 4294967295 ::/0 2001:470:c:2e1::1
===========================================================================

Is there anyway you all can help me get this going? I am technical enough, but if you can in your responses tell me exactly what you want me to do. I have read over some of the threads and gotten lost in the responses so I just wanted to put that out there now to limit confusion. I have already tried DMZ and it doesn't remedy the situation.

cholzhauer · December 26, 2012, 07:02:02 AM

your router is probably blocking protocol 41. To confirm/refute this, use something like wireshark and look for packets being sent to and from your dlink.

flyinonice · December 26, 2012, 02:54:16 PM

Ok, what specifically am I looking for in wireshark? Do I need to try and visit an ipv6 website or should I see it regardless?

cholzhauer · December 26, 2012, 03:34:51 PM

that would work, but ping would be easier. you need to look for the outbound packet and then look for the return packet being sent back to you

flyinonice · December 29, 2012, 11:20:59 PM

I didn't have any luck pinging an ipv6 site. Below is my wireshark data for that period of time. I will note that gogo6 allowed me to connect to ipv6 websites. Don't know if that means my router is capable and I just fudged up my setup somehow or it is a different way to handle the ipv6 websites, but I thought I would note it. I would prefer not to use that and get this setup.

cholzhauer · December 30, 2012, 06:42:28 AM

That's because gogo6 doesn't require your router to pass protool41

flyinonice · December 30, 2012, 06:16:03 PM

Ok that makes sense. So did the capture I attached help to figure out what is going on?

EDIT: I definitely don't know what to look for on my wireshark. I pinged, it obviously didn't work, but beyond that I can't decipher how to determine it was protocol 41 as the culprit.

News:

Need Some Help

flyinonice

cholzhauer

flyinonice

cholzhauer

flyinonice

cholzhauer

flyinonice