• Welcome to Hurricane Electric's IPv6 Tunnel Broker Forums.

I'm clueless with this

Started by alberto90, December 08, 2010, 12:49:27 PM

Previous topic - Next topic

alberto90

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\>ping 66.220.2.74

Pinging 66.220.2.74 with 32 bytes of data:

Reply from 66.220.2.74: bytes=32 time=172ms TTL=52
Reply from 66.220.2.74: bytes=32 time=173ms TTL=52
Reply from 66.220.2.74: bytes=32 time=172ms TTL=52
Reply from 66.220.2.74: bytes=32 time=172ms TTL=52

Ping statistics for 66.220.2.74:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 172ms, Maximum = 173ms, Average = 172ms





jimb

Your typical consumer router/firewall.  You probably just need to configure it to respond to pings.

hisken

#47
Quote from: alberto90 on January 29, 2011, 11:17:20 AM
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\>ping 66.220.2.74

Pinging 66.220.2.74 with 32 bytes of data:

Reply from 66.220.2.74: bytes=32 time=172ms TTL=52
Whoops, I was wrong. Posted my reply a bit too fast I guess. Obviously you need to be able to ping your own external IP4 from another connection, not that 66.220 address from HE. I misread the error message you quoted :)

So yeah, as jimb already said: just configure your router to respond to pings.

alberto90

Quote from: jimb on January 29, 2011, 01:59:18 PM
Your typical consumer router/firewall.  You probably just need to configure it to respond to pings.

How do I do this?  I have recently been sent a new speedtouch router because the other router I had was giving me severe connection problems at some websites.  I'm a bit dubious as to if my ISP will allow me to set up a tunnel.

Thanks for answering

alberto90

#49
Quote from: hisken on January 29, 2011, 03:28:21 PM
Quote from: alberto90 on January 29, 2011, 11:17:20 AM
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\>ping 66.220.2.74

Pinging 66.220.2.74 with 32 bytes of data:

Reply from 66.220.2.74: bytes=32 time=172ms TTL=52
Whoops, I was wrong. Posted my reply a bit too fast I guess. Obviously you need to be able to ping your own external IP4 from another connection, not that 66.220 address from HE. I misread the error message you quoted :)

So yeah, as jimb already said: just configure your router to respond to pings.
Could you explain this to me? Thanks

hisken

#50
Quote from: alberto90 on January 30, 2011, 05:42:23 AM
Could you explain this to me? Thanks

Open a command prompt.

telnet *your-internal-router-ip*
user: Administrator
password: blank or whatever you set

service system ifadd name=PING_RESPONDER group=wan
connection unbind application=IP6TO4 port=0
saveall
exit
exit


Deja vu, seen this before on this forum  :o

alberto90

How do I find my internal router IP? or do I just type in your example?  Please forgive my ignorance I have never done anything like this before there is so much to learn ??? :o

jimb

Go to any of your internal hosts.  The default router will be the IP of your firewall's internal interface.

alberto90

Quote from: jimb on January 30, 2011, 05:38:37 PM
Go to any of your internal hosts.  The default router will be the IP of your firewall's internal interface.

How do I locate these?  I'm running windows xp home edition

cholzhauer

Start > Run

type in "cmd"

hit enter

type in "ipconfig /all"

copy and paste the output onto this page and hit submit.

alberto90

C:\Documents and Settings\>ipconfig/all

Windows IP Configuration

        Host Name . . . . . . . . . . . . : D9MHBN1J
        Primary Dns Suffix  . . . . . . . :
        Node Type . . . . . . . . . . . . : Unknown
        IP Routing Enabled. . . . . . . . : No
        WINS Proxy Enabled. . . . . . . . : No
        DNS Suffix Search List. . . . . . : tiscali.co.uk

Ethernet adapter Local Area Connection:

        Connection-specific DNS Suffix  . : tiscali.co.uk
        Description . . . . . . . . . . . : Intel(R) PRO/100 VE Network Connection
on
        Physical Address. . . . . . . . . : 00-13-20-1B-99-68
        Dhcp Enabled. . . . . . . . . . . : Yes
        Autoconfiguration Enabled . . . . : Yes
        IP Address. . . . . . . . . . . . : 192.168.1.64
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . : 192.168.1.254
        DHCP Server . . . . . . . . . . . : 192.168.1.254
        DNS Servers . . . . . . . . . . . : 192.168.1.254
        Lease Obtained. . . . . . . . . . : 31 January 2011 10:56:45
        Lease Expires . . . . . . . . . . : 01 February 2011 10:56:45











cholzhauer

The address of your router is

192.168.1.254

alberto90

#57
Quote from: cholzhauer on January 31, 2011, 07:38:03 AM
The address of your router is

192.168.1.254


Thanks!  After I bypass the password bit I get this.  I've used my windows admin pass and my ISP pass but they don't seem to let me pass this stage.  I'll retry them all
Username : Administrator
Password :
------------------------------------------------------------------------

                            ______  SpeedTouch 510
                        ___/_____/\
                       /         /\  6.1.18.6
                 _____/__       /  \
               _/       /\_____/___ \  Copyright (c) 1999-2006, THOMSON
              //       /  \       /\ \
      _______//_______/    \     / _\/______
     /      / \       \    /    / /        /\
  __/      /   \       \  /    / /        / _\__
 / /      /     \_______\/    / /        / /   /\
/_/______/___________________/ /________/ /___/  \
\ \      \    ___________    \ \        \ \   \  /
 \_\      \  /          /\    \ \        \ \___\/
    \      \/          /  \    \ \        \  /
     \_____/          /    \    \ \________\/
          /__________/      \    \  /
          \   _____  \      /_____\/
           \ /    /\  \    /___\/
            /____/  \  \  /
            \    \  /___\/
             \____\/

------------------------------------------------------------------------
_{Administrator}=>





cholzhauer

From the manual


If prompted, enter the User name and Password for your SpeedTouch™
security settings and click OK.

The factory default user is 'Administrator'. Its password is blank,
meaning you do not have to enter anything in the password field. It is
advisable to specify another user name and password to protect your
SpeedTouch™ from security violation during the configuration
procedure (see " Access Control" on page 13), or as described in
"3.4 Basic Security" on page 18.


If it's not blank, the password was set by someone and if you don't know it, you need to reset it to factory defaults

alberto90

Quote from: cholzhauer on February 01, 2011, 05:25:21 AM
From the manual


If prompted, enter the User name and Password for your SpeedTouch™
security settings and click OK.

The factory default user is 'Administrator'. Its password is blank,
meaning you do not have to enter anything in the password field. It is
advisable to specify another user name and password to protect your
SpeedTouch™ from security violation during the configuration
procedure (see " Access Control" on page 13), or as described in
"3.4 Basic Security" on page 18.


If it's not blank, the password was set by someone and if you don't know it, you need to reset it to factory defaults

I will try my to obtain the password from my ISP they sent me the router so they should be able to provide me the password.  Watch this space.  Thanks for all help so far