Hurricane Electric's IPv6 Tunnel Broker Forums

Advanced search  

News:

Welcome to Hurricane Electric's Tunnelbroker.net forums!

Author Topic: Routes between different subnets  (Read 2375 times)

dcottle

  • Newbie
  • *
  • Posts: 28
Routes between different subnets
« on: January 17, 2011, 03:53:16 PM »
Right now I have two WAN ipv4's, each has a /48 HE tunnel.

I use radvd and advertise /64 to each adapter in the machines.

Right now machine 1 to 2 routes over the Internet.

How can I set up a route between the two machines?
(these are made up on my iPad and ips not handy).

Example machine 1 eth1 2001:425:291:1/64
Eth2 2001:425:291:2/64

Machine 2 eth0 2001:429:2aa:1/64

How can I route machine 1 to 2 and vice versa?

I normally use route-ethx in /etc/sysconfig/network-scripts

Thanks!
Logged

jimb

  • Hero Member
  • *****
  • Posts: 805
  • ^^^ Warped picture
Re: Routes between different subnets
« Reply #1 on: January 17, 2011, 06:05:08 PM »
If the machines are on a LAN or WAN which can route IPv6 traffic, it's just a matter of setting up the routes on your router(s).  If they have to cross IPv4 only links, you can establish a 6in4 tunnel between routers or machines and route the respective /64s across that.

Or run a dynamic routing protocol after doing so.
Logged