• Welcome to Hurricane Electric's IPv6 Tunnel Broker Forums.

multiple tunnels with one public ip? DNS?

Started by realdreams, March 04, 2012, 10:45:08 PM

Previous topic - Next topic

realdreams

I have only one public ip and want to get two computers behind NAT ipv6tunnel. One computer works just fine but the second one won't work... Tunnel connected but ping times out.

I guess that's because the two computers have the same ipv6 address.

How can I add dns to IP6Tunnel interface... I did it before but dont remember how now...
Thanks

cholzhauer

You can't add DNS to any address in the tunnel /64...HE does not delegate this to you.

If you want to add a second computer, use the routed /64 given to you; you can add DNS to that

realdreams

the client ip address HE gave me is Client IPv6 Address:2001:abc:d:efgh::2/64
I can use 2001:abc:d:efgh::3/64, 2001:abc:d:efgh::4/64 for my additional devices?

I am talking about adding a dns server to the client.

netsh interface ipv6 set dnsserver name="IP6Tunnel" static 2001:470:20::2
netsh interface ipv6 add dnsserver "IP6Tunnel" 2001:4860:4860::8888 Index=2
netsh interface ipv6 add dnsserver "IP6Tunnel" 2001:4860:4860::8844 Index=3

I guess this is how to add dns servers?




cholzhauer

No to all of the above ;)

Let's say the Client IPv6 Address is 2001:abc:d:efgh::2 /64  If you look at your tunnel details page you'll see that your routed /64 is something like 2001:abc:e:efgh:: /64

To add DNS servers, do a


net sh int ipv6 add dns "local area connection" 2001:470:200::2


1) You don't need them on the tunnel interface
2) You're better off using HE's DNS server because google doesn't even whitelist their own AAAA addresses