Hurricane Electric's IPv6 Tunnel Broker Forums

Advanced search  

News:

Welcome to Hurricane Electric's Tunnelbroker.net forums!

Author Topic: Tell me what I am doing wrong.  (Read 3902 times)

gcs8

  • Newbie
  • *
  • Posts: 2
Tell me what I am doing wrong.
« on: October 03, 2013, 01:36:15 PM »

This is what I have done and some diag output.

netsh interface teredo set state disabled
netsh interface ipv6 add v6v4tunnel interface=IP6Tunnel 23x.xxx.xxx.241 216.66.22.2
netsh interface ipv6 add address IP6Tunnel 2001:470:7:c71::2
netsh interface ipv6 add route ::/0 IP6Tunnel 2001:470:7:c71::1

Idx     Met         MTU          State                Name
---  ----------  ----------  ------------  ---------------------------
  1          50  4294967295  connected     Loopback Pseudo-Interface 1
 12          50        1280  disconnected  isatap.{69841058-B8CF-47AF-BE73-820B1
659F51C}
 21          10        1280  connected     IP6Tunnel
 15          10        1500  connected     Local Area Connection 3

Pinging ipv6.l.google.com [2607:f8b0:4002:c06::67] with 32 bytes of data:
General failure.
General failure.
General failure.
General failure.
Logged

broquea

  • Sr. Network Engineer, HE.NET AS6939
  • Administrator
  • Hero Member
  • *****
  • Posts: 1717
Re: Tell me what I am doing wrong.
« Reply #1 on: October 03, 2013, 02:34:37 PM »

is 23x.xxx.xxx.xxx actually configured on your windows machine? If you read the NOTE under the config pastes, it explains what to do when the IPv4 endpoint isn't configured on the machine you are running the pastes on.
Logged

gcs8

  • Newbie
  • *
  • Posts: 2
Re: Tell me what I am doing wrong.
« Reply #2 on: October 03, 2013, 02:38:10 PM »

Yes it is, it is one of the machines in a /28.
« Last Edit: October 03, 2013, 02:39:42 PM by gcs8 »
Logged

cholzhauer

  • Hero Member
  • *****
  • Posts: 2697
Re: Tell me what I am doing wrong.
« Reply #3 on: October 03, 2013, 04:47:40 PM »

Is your firewall passing protocol 41?
Logged

broquea

  • Sr. Network Engineer, HE.NET AS6939
  • Administrator
  • Hero Member
  • *****
  • Posts: 1717
Re: Tell me what I am doing wrong.
« Reply #4 on: October 03, 2013, 04:55:12 PM »

Yes it is, it is one of the machines in a /28.

If your windows machine is configured with one of the globally routed IPs in the /28 then either the Windows firewall is filtering Protocol 41, or your ISP is.
Logged

snarked

  • Hero Member
  • *****
  • Posts: 757
Re: Tell me what I am doing wrong.
« Reply #5 on: October 04, 2013, 10:37:16 AM »

I try not to use Windows when possible.  When you did this:
Quote
netsh interface ipv6 add address IP6Tunnel 2001:470:7:C71::2
Did windows add a route for 2001:470:7:C71:://64?  If not, then the route for the next line has no route to the gateway.
Logged