Welcome to Hurricane Electric's Tunnelbroker.net forums!
Started by jeffno, April 27, 2009, 10:15:25 AM
Quote from: jeffno on April 27, 2009, 10:15:25 AMI'm a bit frustrated at this test. All it says on failure is "Could not grab the file via IPv6 HTTP", and it says for prerequisites that you will need "An IPv6 capable website/webserver". What does that mean? I looked around on the web and there seem to be a number of different ways to set your server for IPv6. How is the client trying to access it? It would help if you offered more details on the exact process you are following. I can do some research myself, but I need specifics instead of guessing. Also, debugging output on failures would be helpful.
Quote from: broquea on April 27, 2009, 11:31:22 AMits doing: wget -6 on http://yourdomain.tld/code.txt[...]
shubjero@egon:~$ wget -6 http://ipv6.shubjero.com/dump/txi34uc5iy.txt --04:03:18-- http://ipv6.shubjero.com/dump/txi34uc5iy.txt => `txi34uc5iy.txt.4'Resolving ipv6.shubjero.com... 2001:470:1c:f0::2Connecting to ipv6.shubjero.com|2001:470:1c:f0::2|:80... connected.HTTP request sent, awaiting response... 200 OKLength: 3 [text/plain]100%[==================================================================================================================>] 3 --.--K/s 04:03:18 (51.40 KB/s) - `txi34uc5iy.txt.4' saved [3/3]
shubjero@egon:~$ dig ipv6.shubjero.com @22.214.171.124 AAAA; <<>> DiG 9.3.2 <<>> ipv6.shubjero.com @126.96.36.199 AAAA; (1 server found);; global options: printcmd;; Got answer:;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 55589;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0;; QUESTION SECTION:;ipv6.shubjero.com. IN AAAA;; ANSWER SECTION:ipv6.shubjero.com. 43200 IN AAAA 2001:470:1c:f0::2;; Query time: 190 msec;; SERVER: 188.8.131.52#53(184.108.40.206);; WHEN: Thu May 21 21:48:31 2009;; MSG SIZE rcvd: 63
Quote from: arcticfire on July 19, 2009, 07:10:10 PMhttp://ipv6.home.core.arcticfire.net
telnet ipv6.home.core.arcticfire.net 80Trying 2001:470:1f06:6c5::2...
Quote from: arcticfire on July 20, 2009, 11:23:22 AMCould my router (DD-WRT) be firewalling it? It's not terminating at the router, I'm passing protocol 41 through to a computer on my network and terminating it there. iptables and ip6tables on that computer both show no rules with a default policy of ACCEPT.EDIT: I fired up wireshark and I found that when I run the test, no packets show up on that computer. So, my router must be blocking the incoming traffic. What would be a iptables (not ip6tables) rule that will allow all IPv6 traffic to go to it's destination?
iptables -t nat -D POSTROUTING -o vlan1 -j MASQUERADEiptables -t nat -I POSTROUTING -p ! ipv6 -o vlan1 -j MASQUERADE