• Welcome to Hurricane Electric's IPv6 Tunnel Broker Forums.


Welcome to Hurricane Electric's Tunnelbroker.net forums!

Main Menu

Cannot change tunnel MTU anymore.

Started by kamil445, July 03, 2023, 11:47:22 PM

Previous topic - Next topic



I reinstalled Windows, old installation had only updates to 2021, now system is up to date but becuse of this, now i cannot change tunnel interface MTU, default is 1280, always i changed to 1480 (IPv4 MTU = 1500, IPv6 = 1500-20). I used this command that worked well on Windows 7 and Windows 10 updated only with 2021 updates:

netsh interface ipv6 set subinterface IP6Tunnel mtu=1480 store=persistent
I can only input 1280, nothing less, nothing more.

There is any way to change MTU on updated system ? maybe PowerShell way ? or i need to install windows updated only with 2021 updates.

I do some research and found this, i am not only person who have this issue:



For someone, reinstall was the solution but i have installation ISO updated to 2023 and i probably have integrated "bad" updates, so reinstall will do nothing...

Any ideas ?