Text only | Text with Images

Hurricane Electric's IPv6 Tunnel Broker Forums

General IPv6 Topics => IPv6 Basics & Questions & General Chatter => Topic started by: irhserver on November 10, 2010, 06:04:06 PM

Title: ipv4_end.php problem
Post by: irhserver on November 10, 2010, 06:04:06 PM
Hi,
I have a problem when I try to update the tunnel's IP with the ipv4_end.php page.

the GET query is ok and all parameters are right but I received every times this message:
- Your tunnel end-point is your VPN IP.  Cannot update.

Any suggestions?

Thanks
Title: Re: ipv4_end.php problem
Post by: broquea on November 10, 2010, 06:17:00 PM
If you were using the pptp beta as your endpoint then you wouldn't update your ipv4 endpoint. If yuo aren't using it anymore, then you uncheck "use vpn endpoint" in the broker, and you can update your ipv4 endpoint.
Title: Re: ipv4_end.php problem
Post by: irhserver on November 10, 2010, 06:42:30 PM
Many thanks.

I had forgotten that in the past I have activated the pptp beta and in the tunnel detail page there isn't the "use vpn endpoint" checkbox.
Text only | Text with Images