Text only | Text with Images

Hurricane Electric's IPv6 Tunnel Broker Forums

General IPv6 Topics => IPv6 on Windows => Topic started by: nimbus on May 31, 2011, 05:41:04 AM

Title: Tunnel configuration command
Post by: nimbus on May 31, 2011, 05:41:04 AM
Hi,

       I use this command "netsh interface ipv6 add v6v4tunnel IP6Tunnel 78.158.8.219 216.66.80.90" and receive answer
"You where not connected because a duplicate name exists on the network. If joining a domain, go to System in Control Panel to change the computer name and try again. If joining a workgroup, choose another workgroup name."
       Where is the problem?

nimbus
Title: Re: Tunnel configuration command
Post by: cholzhauer on May 31, 2011, 05:52:14 AM
What OS?

You've probably already tried to set up the tunnel on the computer.  Delete the existing IP6tunnel adapter and try again
Title: Re: Tunnel configuration command
Post by: nimbus on May 31, 2011, 06:11:32 AM
WIN7 - 64 bit
Title: Re: Tunnel configuration command
Post by: cholzhauer on May 31, 2011, 06:12:38 AM
Yeah, try and delete the IP6Tunnel interface and re-create the tunnel
Title: Re: Tunnel configuration command
Post by: nimbus on May 31, 2011, 06:17:22 AM
How to Delete the existing IP6tunnel adapter?
Title: Re: Tunnel configuration command
Post by: nimbus on May 31, 2011, 06:18:37 AM
or how to delete the IP6Tunnel interface?
Title: Re: Tunnel configuration command
Post by: nimbus on May 31, 2011, 06:39:01 AM
use this Topic: Vista : duplicate name exists on the network. Problem resolved.

nimbus  :)
Text only | Text with Images