Text only | Text with Images

Hurricane Electric's IPv6 Tunnel Broker Forums

General IPv6 Topics => IPv6 on Windows => Topic started by: coskun1990 on September 05, 2008, 10:23:45 AM

Title: Help me please
Post by: coskun1990 on September 05, 2008, 10:23:45 AM
i have me registred on tunnelbroker.net and have make a tunnel. i have win vista and i have put te next codes on the command line

netsh interface ipv6 add v6v4tunnel IP6Tunnel 85.223.50.138 216.66.84.46
netsh interface ipv6 add address IP6Tunnel 2001:470:1f14:469::2
netsh interface ipv6 add route ::/0 IP6Tunnel 2001:470:1f14:469::1

that's all ok.
but, wat must i now do? do i need install a program?
Title: Re: Help me please
Post by: kriteknetworks on September 06, 2008, 08:26:17 AM
Try accessing an ipv6 website?
Title: Re: Help me please
Post by: coskun1990 on September 06, 2008, 10:21:55 AM
when i go to http://whatismyv6.com/ i see only ipv4 and not ipv6.
i have not install any tunnel program.
have i need a program?
Title: Re: Help me please
Post by: broquea on September 06, 2008, 02:21:19 PM
If your host is behind a firewall/router appliance, make sure that when creating the tunnel under Vista, that you change out "85.223.50.138" for the IP assigned to you by DHCP.

If your Vista machine is directly connected to the internet on that IP, it should have worked.
Title: Re: Help me please
Post by: coskun1990 on September 06, 2008, 03:40:25 PM
how must i do that?
( i have router sweex LC000070, static ip)
Text only | Text with Images