Text only | Text with Images

Hurricane Electric's IPv6 Tunnel Broker Forums

General IPv6 Topics => IPv6 Software Applications & Hardware Appliances => Topic started by: lfoothome on January 15, 2012, 06:45:10 PM

Title: Netgear WDNR3700 V3 aka Netgear N600 - No HE Tunnel Support
Post by: lfoothome on January 15, 2012, 06:45:10 PM
This unit advertises being IPv6 capable on the box, but I just confirmed with Netgear Tech Support that it cannot serve as an HE Tunnel Endpoint. With OOB firmware.  When I get my Linksys "unbricked" I am going to try other linux based firmware on it and see if it can be a tunnel endpoint.

Title: Re: Netgear WDNR3700 V3 aka Netgear N600 - No HE Tunnel Support
Post by: adiblol on January 16, 2012, 07:53:02 AM
Don't you have CLI access on it?

You can also use 6to4 - HE.net advertises 192.88.99.1 so there is some chance that you will use HE's tunnel with 6to4.
Title: Re: Netgear WDNR3700 V3 aka Netgear N600 - No HE Tunnel Support
Post by: lfoothome on January 16, 2012, 01:42:28 PM
The only Out of Box access to the WDNR3700 V3 is via the routers webpage, cli is not an option.
Text only | Text with Images