Print Page - new to ipv6 need some help

Title: new to ipv6 need some help
Post by: raymondjtoth on May 23, 2012, 10:02:05 AM

i have windows 7 home prem i did the config what i give the eather net card for ipv6 adderss here my info
Tunnel ID: 160655Delete Tunnel
Creation Date:May 23, 2012
Description:
IPv6 Tunnel Endpoints
Server IPv4 Address:209.51.181.2
Server IPv6 Address:2001:470:1f10:41f::1/64
Client IPv4 Address:69.47.221.195
Client IPv6 Address:2001:470:1f10:41f::2/64
Available DNS Resolvers
Anycasted IPv6 Caching Nameserver:2001:470:20::2
Anycasted IPv4 Caching Nameserver:74.82.42.42
Routed IPv6 Prefixes
Routed /64:2001:470:1f11:41f::/64
Routed /48:Assign /48
rDNS DelegationsEdit
rDNS Delegated NS1:
rDNS Delegated NS2:
rDNS Delegated NS3:
rDNS Delegated NS4:
rDNS Delegated NS5:
im new what info i give it also got ipv4 thanks so much if can hyelp im new to thsi i got eathernet card also thanks on windows 7 home prm 32 bit

Title: Re: new to ipv6 need some help
Post by: cholzhauer on May 23, 2012, 10:09:00 AM

I'm not sure what you're asking for help on...

Title: Re: new to ipv6 need some help
Post by: raymondjtoth on May 23, 2012, 10:26:44 AM

how to set up the ip on winows 7 home prem 32 bit tell me not connected i need ip adderss for eathernet card setting in network thanks

Title: Re: new to ipv6 need some help
Post by: cholzhauer on May 23, 2012, 10:34:42 AM

what commands have you ran?

Title: Re: new to ipv6 need some help
Post by: raymondjtoth on May 23, 2012, 10:53:11 AM

netsh interface teredo set state disabled
netsh interface ipv6 add v6v4tunnel IP6Tunnel 69.47.221.195 209.51.181.2
netsh interface ipv6 add address IP6Tunnel 2001:470:1f10:41f::2
netsh interface ipv6 add route ::/0 IP6Tunnel 2001:470:1f10:41f::1

when if try to go to google ipv6 site tell me failed that the command for windows 7 home prem 32 bit i got

Title: Re: new to ipv6 need some help
Post by: broquea on May 23, 2012, 10:55:44 AM

Is 69.47.221.195 actually configured on your Windows machine? If not, use the IP that is on that second netsh command.

Title: Re: new to ipv6 need some help
Post by: raymondjtoth on May 23, 2012, 11:02:18 AM

no what command do i want to change?

Title: Re: new to ipv6 need some help
Post by: broquea on May 23, 2012, 11:14:35 AM

netsh interface ipv6 add v6v4tunnel IP6Tunnel 69.47.221.195 209.51.181.2

change 69.47.221.195 to whatever IP is configured on your windows machine

Title: Re: new to ipv6 need some help
Post by: Sus on May 23, 2012, 12:45:23 PM

Commands for dynamic IPv4 for Windows 7

netsh interface ipv6 delete interface IP6Tunnel
netsh interface ipv6 add v6v4tunnel IP6Tunnel 69.47.221.195 209.51.181.2
netsh interface ipv6 set address IP6Tunnel 2001:470:1f10:41f::2
netsh interface ipv6 set route ::/0 IP6Tunnel 2001:470:1f10:41f::1

Tunnel may stop working if you have resolved all ICMPv6 :)

Hurricane Electric's IPv6 Tunnel Broker Forums

Tunnelbroker.net Specific Topics => Questions & Answers => Topic started by: raymondjtoth on May 23, 2012, 10:02:05 AM