Hurricane Electric's IPv6 Tunnel Broker Forums

Advanced search  


Welcome to Hurricane Electric's forums!

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - mthode

Pages: [1]
Questions & Answers / Re: Youtube/Facebook Video Slow/Buffering.
« on: February 10, 2018, 05:53:32 PM »
Ya, same here with

Questions & Answers / Re: PPTP: pptpclient problem on Gentoo linux
« on: June 24, 2010, 08:12:34 AM »

This setup is what I used for gentoo linux on my laptop.  I didn't test it on hardened but go ahead and ask me on #gentoo-hardened on freenode.  I'm prometheanfire.

Questions & Answers / Re: PPTP Connected but no Traffic
« on: June 04, 2010, 02:06:02 PM »
Yep, still up for me too after 3 hours.

Kernel config:
Code: [Select]
zgrep IP_MULTIPLE_TABLES < /proc/config.gzthat needs to return 'IP_MULTIPLE_TABLES=y'

PPTP config:
Code: [Select]
# Secrets for authentication using CHAP
# client server secret IP addresses
user_name label SECRET_PASS *
The user_name is your user name from HE.
The label is whatever you want to call your tunnel.
SECRET_PASS is the pass you set for the tunnel from HE.

/etc/ppp/peers/[label]   (use the name of whatever you called your tunnel)
Code: [Select]
pty "pptp tunnel_server --nolaunchpppd"
name user_name
file /etc/ppp/options.label
The tunnel_server is the server you connect to at HE.
The user_name is your user name from HE.
The remote name is the name of your tunnel.
The file option is the file you use for your tunnel specific settings.  Change the label to what you used up in /etc/ppp/chap-secrets.

Code: [Select]
mtu 1400
mru 1400
lcp-echo-failure 30
lcp-echo-interval 10

Add the following to /etc/ppp/ip-up
Code: [Select]
echo "1 admin" >> /etc/iproute2/rt_tables
ip route add default dev ppp0 table admin
ip rule add from your_ip_from_he table admin
The your_ip_from_he needs to be the IP that HE is routing to you.

Add the following to /etc/ppp/ip-down
Code: [Select]
ip rule del from your_ip_from_he table admin
ip route del default dev ppp0 table admin
sed "/1 admin/d" /etc/iproute2/rt_tables
The your_ip_from_he needs to be the IP that HE is routing to you.

After all this is done, all you need to do is the following
Code: [Select]
pon label
Code: [Select]
poff labelThe label is whatever you called your tunnel in /etc/ppp/chap-secrets and the peers file.

*edit: corrected title and added some options

Questions & Answers / Re: slave
« on: April 26, 2010, 04:31:46 PM »
mailed, thanks

Questions & Answers / slave
« on: April 26, 2010, 03:59:44 PM »
I am currently using my own bind server and having pull the reccords as a slave.  Is there a way to do this with

IPv6 on Linux & BSD & Mac / Re: multiple computers
« on: October 08, 2009, 01:25:34 PM »
ok, now that that is fixed it is working :D
now I need to figure out if radvd works across many interfaces and install it on pfsense/freebsd

IPv6 on Linux & BSD & Mac / Re: multiple computers
« on: October 08, 2009, 01:10:14 PM »
  I just cannot ping.

can you ping from your freebsd router?

Can you post the routing tables for both your router and your workstation?

Also, post the output of "ifconfig -a" on your workstation

ok, I was advertising the wrong subnet 2001:470:1f10:f8::/64 is now 2001:470:1f11:f8::/64

IPv6 on Linux & BSD & Mac / Re: multiple computers
« on: October 08, 2009, 12:56:15 PM »
I think I'm confused.  You want to use a FreeBSD machine as a router?

In the mean time, you have your RADVD configured incorrectly.  You are announcing a /48, which will not work.  You need to announce a /64.  So:

Code: [Select]
prefix  2001:470:b8d9::/48
should be

Code: [Select]
prefix 2001:470:b8d9:0000::/64 or something of that sort (the last 4 characters are really up to you)

what I posted for radvd was incorrect, it is a /64 and a second server does get an ipv6 address.  I just cannot ping.

IPv6 on Linux & BSD & Mac / Re: multiple computers
« on: October 08, 2009, 12:49:49 PM »
I knew I should have included that, on the device I want to use as my router I do the following
It is Linux for the router (unless I can advertise over multiple interfaces it will have to be linux)
I would prefer to have this set up on my firewall (pfsense, freebsd based)

Code: [Select]
ip tunnel add he-ipv6 mode sit remote local ttl 255
ip link set he-ipv6 up
ip addr add 2001:470:1f10:f8::4/64 dev he-ipv6
ip route add ::/0 dev he-ipv6

Code: [Select]
interface eth0
AdvSendAdvert on;
prefix  2001:470:b8d9::/48
AdvOnLink on;
AdvAutonomous on;

IPv6 on Linux & BSD & Mac / multiple computers
« on: October 08, 2009, 12:39:48 PM »
I am trying to get multiple computers on multiple subnets to use IPv6 through a tunnel provisioned through HE but have no idea where to start, what seems to happen is whenever I try to use the HE provided config for each of my servers it works for only one, if I use it (changing the address) for more then one only one gets out (ping6  Is there a way to get many servers to work with IPv6?

Pages: [1]