Print

[lynxus]

Hi guys,

I have linux working fine behind a router and switch however in windows all i can do is have the tunnel

How do I use an ip in the routed /48.
I set an IP on my lan interface however i cant seem to ping it from any other working IPv6 network.

The IPs on the tunnel interfaces cant be used by apache or any other server software so i need to figure out how to get windows software to see an IPv6 IP and useit.

I hope this made sense?

Thanks again
-L

Ethernet adapter lan:

        Connection-specific DNS Suffix  . :
        IP Address. . . . . . . . . . . . : 89........
        Subnet Mask . . . . . . . . . . . : 255.255.255.240
        IP Address. . . . . . . . . . . . : 2001:470:9235:1::1
        IP Address. . . . . . . . . . . . : fe80::20c:29ff:fef1:4231%6
        Default Gateway . . . . . . . . . : 89..........

Tunnel adapter Teredo Tunneling Pseudo-Interface:

        Connection-specific DNS Suffix  . :
        IP Address. . . . . . . . . . . . : fe80::ffff:ffff:fffd%4
        Default Gateway . . . . . . . . . :

Tunnel adapter Automatic Tunneling Pseudo-Interface:

        Connection-specific DNS Suffix  . :
        IP Address. . . . . . . . . . . . : fe80::5efe:89.206.170.113%2
        Default Gateway . . . . . . . . . : ::216...........

[sttun]

just as a good starting point: disable any sw firewall you might have on youre machine, in my experience vary few ar ipv6 compatible so ipv6 realted traffic gets dropped.

[lynxus]

All software firewalls are disabled so this isnt the problem.

Thnaks anyway

[piojan]

You can use the router advertising protocol and have your windows obtain the ip from linux.
Also if you wan't to mannualy add the ip like you did - check the route - what gateway is sat on the windows maching (probably should be linux) and if it's reachable.

Your 2001:470:9235:1::1 (windows box) needs to forward packets somewhere (to the gateway)
so you need to set an ip on the linux box like 2001:470:9235:1::2. Also the gateway needs to have packed forwarding turn on.