How to configure a Vigor 2130 (TSCP, AICCU)?

[olivercarl]

Dear all
I would like to IPv6 enable my home network, using a Vigor 2130. I think the router options that might work are TSCP and AICCU, but I don't manage to figure out how to populate the necessary configuration options (other options are "Link Local Only", "Static IPv6", "DHCPv6 Client (IA_NA)", "DHCPv6 Client (IA_PD)"):

TSCP:
User Name
Password
Tunnel Broker
Tunnel mode (options are IPv6-in-IPv4 Tunnel/IPv6-in-IPv4 (Native)/IPv6-in-IPv4 (NAT traversal)
Auto-reconnect Delay
Keepalive
Keepalive Interval
Prefix Length

AICCU:
User Name
Password    
Server
Tunnel mode (options are NONE, AYIYA, Heartbeat)
Tunnel ID

For AICCU, I tried all possible tunnel mode options, but the following problem was always logged:
syslog: Couldn't connect to the TIC server 216.66.80.98

Can somebody help? It would be greatly appreciated!
BR, Oliver

[cholzhauer]

You  need to use Ipv6 in IPv4 for your tunnel

AICCU is used with SIXXS.

[jrocha]

To clarify what cholzhauer said, the Tunnelbroker service does not use AICCU/TSP, so you will not need an AICCU client. To set up a tunnel through Tunnelbroker, you will use 6in4 (IPv6-in-IPv4/protocol 41).