Hurricane Electric's IPv6 Tunnel Broker Forums

Advanced search  

News:

Welcome to Hurricane Electric's Tunnelbroker.net forums!

Author Topic: unable to reach H.E part of my Tunnel  (Read 3024 times)

SUSTipv6

  • readonly_member
  • Newbie
  • *
  • Posts: 9
unable to reach H.E part of my Tunnel
« on: December 30, 2010, 05:04:53 AM »

Hi, I was having problem with configuring tunnel in win 7 32. but now it's configured

>>>>>>
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

C:\Users\MUTAZ>ipconfig /all

Windows IP Configuration

   Host Name . . . . . . . . . . . . : MUTAZ-PC
   Primary Dns Suffix  . . . . . . . :
   Node Type . . . . . . . . . . . . : Mixed
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No


Ethernet adapter Local Area Connection:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . : sustech.edu
   Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
   Physical Address. . . . . . . . . : 00-24-81-41-97-4C
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Wireless Network Connection:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Intel(R) WiFi Link 5100 AGN
   Physical Address. . . . . . . . . : 00-21-6B-9E-FF-D2
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2001::10(Preferred)
   Link-local IPv6 Address . . . . . : fe80::d513:25d9:b746:912b%11(Preferred)
   IPv4 Address. . . . . . . . . . . : 172.27.150.201(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 172.27.150.254
   DHCPv6 IAID . . . . . . . . . . . : 184557931
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-2A-88-D8-00-24-81-41-97-4C

   DNS Servers . . . . . . . . . . . : 2001:470:20::2
                                       196.1.209.76
   NetBIOS over Tcpip. . . . . . . . : Enabled


Tunnel adapter IP6Tunnel:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft Direct Point-to-point Adapater
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2001:470:1f12:4c7::2(Preferred)
   Link-local IPv6 Address . . . . . : fe80::6402:558d:191c:74c7%21(Preferred)
   Default Gateway . . . . . . . . . : 2001:470:1f12:4c7::1
   DNS Servers . . . . . . . . . . . : 2001:470:20::2
                                       196.1.209.76
   NetBIOS over Tcpip. . . . . . . . : Disabled
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

but when i ping the tunnel gateway "Request timed out." :(


>>>>>>>>>>>>>>>>>>

C:\Users\MUTAZ>ping 2001:470:1f12:4c7::1

Pinging 2001:470:1f12:4c7::1 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 2001:470:1f12:4c7::1:
    Packets: Sent = 4, Received = 0, Lost = 4 (100% loss)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>


where is the problem?????
please help

if it's about protocol 41, i thing its allowed, but is they are any way to check out if it's really allowed or not???
Logged

cholzhauer

  • Hero Member
  • *****
  • Posts: 2671
Re: unable to reach H.E part of my Tunnel
« Reply #1 on: December 30, 2010, 05:30:33 AM »

As far as I know, there is not a way to check, aside from watching traffic with something like wireshark
Logged

SUSTipv6

  • readonly_member
  • Newbie
  • *
  • Posts: 9
Re: unable to reach H.E part of my Tunnel
« Reply #2 on: December 30, 2010, 05:41:15 AM »

OK, but I wondering is this routing table is correct with the tunnel??

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
C:\Users\MUTAZ>netsh interface ipv6 show route

Publish  Type      Met  Prefix                    Idx  Gateway/Interface Name
-------  --------  ---  ------------------------  ---  ------------------------
No       Manual    256  ::/0                       21  2001:470:1f12:4c7::1
No       Manual    256  2001:470:1f11:4c7::/64     11  Wireless Network Connecti
on
No       Manual    256  2001:470:1f11:4c7::1/128   11  Wireless Network Connecti
on
No       Manual    256  2001:470:1f12:4c7::2/128   21  IP6Tunnel
No       Manual    256  fe80::/64                  12  Local Area Connection
No       Manual    256  fe80::/64                  15  Local Area Connection* 11

No       Manual    256  fe80::/64                  11  Wireless Network Connecti
on
No       Manual    256  fe80::/64                  21  IP6Tunnel
No       Manual    256  fe80::5efe:172.27.150.201/128   34  isatap.{B80B18C4-C92
8-4AB3-BFD5-55BA29B46912}
No       Manual    256  fe80::61e3:fe5:ebb0:af02/128   15  Local Area Connection
* 11
No       Manual    256  fe80::6402:558d:191c:74c7/128   21  IP6Tunnel
No       Manual    256  fe80::b09f:99a3:9f49:2947/128   12  Local Area Connectio
n
No       Manual    256  fe80::d513:25d9:b746:912b/128   11  Wireless Network Con
nection
No       Manual    256  ff00::/8                    1  Loopback Pseudo-Interface
 1
No       Manual    256  ff00::/8                   12  Local Area Connection
No       Manual    256  ff00::/8                   15  Local Area Connection* 11

No       Manual    256  ff00::/8                   11  Wireless Network Connecti
on
No       Manual    256  ff00::/8                   21  IP6Tunnel
Logged

cholzhauer

  • Hero Member
  • *****
  • Posts: 2671
Re: unable to reach H.E part of my Tunnel
« Reply #3 on: December 30, 2010, 05:42:22 AM »

In your case, your routing table is pretty simple.  As long as your default route is correct (and it is here) you should be OK
Logged