Tunnel doesn't work, please help.

[mireka]

Hello, I've been trying to make it work for weeks now.

The PC is under an ASUS RT-N16 router with TomatoUSB1.28 firmware installed), which is connected to a cable modem.

I've ran the script provided as follow

netsh interface teredo set state disabled
netsh interface ipv6 add v6v4tunnel IP6Tunnel 192.168.1.2 216.218.221.42
netsh interface ipv6 add address IP6Tunnel 2001:470:35:22a::2
netsh interface ipv6 add route ::/0 IP6Tunnel 2001:470:35:22a::1

Is it possible that it is because my ISP force me through a proxy?
It shows that I am behind a proxy
Possible Proxy Detected: HTTP/1.1 NetScaler
At http://www.whatismyip.com/

Anybody could help?
Thanks in advance.

[johnpoz]

And did you forward protocol 41 on your router? (tomato box)

Something prob like
iptables -A yourwanip -p 41 -d 192.168.1.2 -j ACCEPT

edit:  I would assume that router will run dd-wrt if runs tomato.. I would suggest you change to dd-wrt there are many writeups on using it as the endpoint of the tunnel vs some windows box behind the nat router.

[mireka]

And did you forward protocol 41 on your router? (tomato box)

Something prob like
iptables -A yourwanip -p 41 -d 192.168.1.2 -j ACCEPT

edit:  I would assume that router will run dd-wrt if runs tomato.. I would suggest you change to dd-wrt there are many writeups on using it as the endpoint of the tunnel vs some windows box behind the nat router.

I ran
iptables -A wanin -p 41 -d 192.168.1.2 -j ACCEPT
as suggested from http://www.tunnelbroker.net/forums/index.php?topic=945.0
using telnet while its in the /tmp/home/root

I'll try changing wanin to my wan ip

I'm a total noob at this, is it correct to run the script in telnet?

[mireka]

iptables -A mywanip -p 41 -d 192.168.1.2 -j ACCEPT

doesn't work, saying no chain/target/match by that name

[cholzhauer]

It's also possible that your ISP is blocking protocol 41...I think you should check with them first before doing all the work on your end