Configuring IPVP on XP SP3

[CareyG]

0x3 ...f0 de f1 08 42 7d ...... Intel(R) 82577LM Gigabit Network Connection - P
cket Scheduler Miniport
0x4 ...44 45 53 54 42 00 ...... Nortel IPSECSHM Adapter - Packet Scheduler Mini
ort
0x5 ...00 ff 78 f4 cf 17 ...... Nortel VPN Adapter - Packet Scheduler Miniport
===========================================================================
===========================================================================
Active Routes:
Network Destination        Netmask          Gateway       Interface  Metric
          0.0.0.0          0.0.0.0     71.164.237.1   71.164.237.12       20
     71.164.237.0    255.255.255.0    71.164.237.12   71.164.237.12       20
    71.164.237.12  255.255.255.255        127.0.0.1       127.0.0.1       20
   71.255.255.255  255.255.255.255    71.164.237.12   71.164.237.12       20
        127.0.0.0        255.0.0.0        127.0.0.1       127.0.0.1       1
        224.0.0.0        240.0.0.0    71.164.237.12   71.164.237.12       20
  255.255.255.255  255.255.255.255    71.164.237.12               4       1
  255.255.255.255  255.255.255.255    71.164.237.12               2       1
  255.255.255.255  255.255.255.255    71.164.237.12   71.164.237.12       1
  255.255.255.255  255.255.255.255    71.164.237.12               5       1
Default Gateway:      71.164.237.1
===========================================================================
Persistent Routes:
  None

[cholzhauer]

I'm confused as to where we are.

It looks like you've allowed ping to your router

Code Select Expand


C:\Users\cholzhauer>ping 71.244.29.83

Pinging 71.244.29.83 with 32 bytes of data:
Reply from 71.244.29.83: bytes=32 time=102ms TTL=50
Reply from 71.244.29.83: bytes=32 time=126ms TTL=50
Reply from 71.244.29.83: bytes=32 time=54ms TTL=50
Reply from 71.244.29.83: bytes=32 time=67ms TTL=50

Ping statistics for 71.244.29.83:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 54ms, Maximum = 126ms, Average = 87ms


Does creating your tunnel work now?

You haven't set up the tunnel yet because there are no IPv6 routes in your table