• Welcome to Hurricane Electric's IPv6 Tunnel Broker Forums.

News:

Welcome to Hurricane Electric's Tunnelbroker.net forums!

Main Menu

More ipv6 tunnels

Started by Coolmax, December 02, 2011, 06:41:12 AM

Previous topic - Next topic

Coolmax

Hi all,
Sorry for the newbie question. I have VPS (on vmware host). I have IPv4 connection on the eth0 interface. I want to know if it is possible to get working ipv6 from different brokers? Now, I have following tunnels:

# ip tunnel
sit0: ipv6/ip  remote any  local any  ttl 64  nopmtudisc
nn-ipv6: ipv6/ip  remote 210.86.228.4  local 195.117.191.110  ttl 255
lewy-ipv6: ipv6/ip  remote 95.211.30.223  local 195.117.191.110  ttl 255
he-ipv6: ipv6/ip  remote 216.66.84.46  local 195.117.191.110  ttl 255

# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
   link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
   link/ether 00:50:56:85:00:e7 brd ff:ff:ff:ff:ff:ff
3: sit0: <NOARP> mtu 1480 qdisc noqueue state DOWN
   link/sit 0.0.0.0 brd 0.0.0.0
6: nn-ipv6: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN
   link/sit 195.117.191.110 peer 210.86.228.4
8: lewy-ipv6: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN
   link/sit 195.117.191.110 peer 95.211.30.223
37: he-ipv6: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN
   link/sit 195.117.191.110 peer 216.66.84.46
91: sixxs: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1280 qdisc pfifo_fast state UNKNOWN qlen 500


Only tunnel from HE is now working. What is interesting is at night I could ping ipv6 of sixxs, I made no changes and now (10-12hrs later) there is no reply for ping packets. "tcpdump -Unvvi sixxs" doesn't capture any packet. Also, response for pings (he-ipv6) was for the second time.  If someone want to help me, I can paste more information. Thanks in advance.

Kind regards, Matthew

broquea

You need to implement source-based routing. This involves creating 2 separate routing tables/entries so that when sourced from HE space it goes over He, and when sixxs sourced, over sixxs. As it is, we have RPF installed upstream of the tservs, so it will only allow stuff out sourced from our space.

Coolmax

Thanks! Now my ipv6 tunnels are working OOTB. It's amazing how linux is powerful for networking ^.^