Print

[aiv]

Hello
I have set up tunnel and its working on ubuntu 11.10 machine. Can visit ipv6.google.com etc.
Problem is when i try to connect PC to that router. I can't ping router->pc and pc->router
I'm using wireless connection on router to get internet access. PC is connected via cable.
PC seems to be getting IP from router but thats all.

My interfaces:

Code: [Select]

auto lo
iface lo inet loopback
auto he-ipv6
iface he-ipv6 inet6 v4tunnel
endpoint 216.66.80.30
address 2001:470:1f0a:10b::2
netmask 64
up ip -6 route add default dev he-ipv6
down ip-6 route del default dev he-ipv6
My radvd.conf

Code: [Select]

interface eth0
{
AdvSendAdvert on;
prefix 2001:470:1f0b:10b::/64
{
AdvRouterAddr on;
AdvOnLink on;
AdvAutonomous on;
};
};
ifconfig

eth0      Link encap:Ethernet  HWaddr 00:26:22:cf:a0:ee  
          inet6 addr: fe80::226:22ff:fecf:a0ee/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:806 (806.0 B)  TX bytes:5496 (5.4 KB)
          Interrupt:17

he-ipv6   Link encap:IPv6-in-IPv4  
          inet6 addr: fe80::c0a8:109/64 Scope:Link
          inet6 addr: 2001:470:1f0a:10b::2/64 Scope:Global
          UP POINTOPOINT RUNNING NOARP  MTU:1480  Metric:1
          RX packets:1148 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6470 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:1032191 (1.0 MB)  TX bytes:648472 (648.4 KB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:493 errors:0 dropped:0 overruns:0 frame:0
          TX packets:493 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:85479 (85.4 KB)  TX bytes:85479 (85.4 KB)

wlan0     Link encap:Ethernet  HWaddr 00:1e:65:d0:cf:cc  
          inet addr:192.168.1.9  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::21e:65ff:fed0:cfcc/64 Scope:Link
          inet6 addr: 2001:470:1f0b:10b::/64 Scope:Global
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:10882 errors:0 dropped:0 overruns:0 frame:0
          TX packets:14250 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:10293322 (10.2 MB)  TX bytes:2109062 (2.1 MB)

Any ideas? I'm sure i'm missing something

[cholzhauer]

Since you're using eth0 announce RADVD, you need to give that interface an IP address....use something like 2001:470:1f0b:10b::1/64

[aiv]

i did

Code: [Select]

/sbin/ifconfig eth0 inet6 add 2001:470:1f0b:10b::1/64
and while ping i get Address unreachable.

[cholzhauer]

You did that before or after I mentioned it?  If you did it before, it didn't show on your ifconfig

If you did it after, are you running a firewall?

[aiv]

I did it after You told me to.
No firewall on Ubuntu.

[cholzhauer]

Are you able to ping 2001:470:1f0b:10b::1 on your Ubuntu machine? 

Are you getting an IPv6 address on any computer you attach to the network?

[aiv]

On connected PC ifconfig looks like this:

Code: [Select]

eth0      Link encap:Ethernet  HWaddr 08:00:27:02:2f:75 
          inet6 addr: 2001:470:1f0b:10b:a00:27ff:fe02:2f75/64 Scope:Global
          inet6 addr: fe80::a00:27ff:fe02:2f75/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:309 errors:0 dropped:0 overruns:0 frame:0
          TX packets:68 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:39711 (39.7 KB)  TX bytes:15847 (15.8 KB)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:305 errors:0 dropped:0 overruns:0 frame:0
          TX packets:305 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:53759 (53.7 KB)  TX bytes:53759 (53.7 KB)


On router i can't ping that address You gave me.

[cholzhauer]

I can't ping 2001:470:1f0b:10b::1 either, and if that's the IP you're using on Eth0 on your ubuntu machine with no firewall, it should be ping-able

I'm not able to ping 2001:470:1f0a:10b::2 either, which is the address of your side of the tunnel...normally that means that the tunnel isn't working or you are running a firewall

[aiv]

Tunnel must be working because i can ping easy www.v6.facebook.com
On Ubuntu i didn't install ANY firewall at all. I get WiFi connection from router and on that router i don't have firewall enabled either.

UPDATE
Ok i am able to ping 2001:470:1f0b:10b::1 on my Ubuntu router.

On client Ubuntu i can ping to 2001:470:1f0b:10b::1 and 2001:470:1f0a:10b::2 but still can't visit any websites from client machine.

[nickbeee]

Do you have ipv6 routing turned on in the kernel?

I'm not familiar with Ubuntu these days but you should check /etc/sysctl.conf has net.ipv6.conf.default.forwarding=1

[aiv]

I have net.ipv6.conf.all.forwarding=1 in this file enabled.

[aiv]

I will update thread with new things.
Interfaces

Code: [Select]

auto lo
iface lo inet loopback
auto he-ipv6
iface he-ipv6 inet6 v4tunnel
endpoint 216.66.80.30
address 2001:470:1f0a:10b::2
netmask 64
up ip -6 route add default dev he-ipv6
down ip -6 route del default dev he-ipv6

radvd.conf

Code: [Select]

interface eth0
{
AdvSendAdvert on;
prefix 2001:470:1f0b:10b::/64
{
AdvRouterAddr on;
AdvOnLink on;
AdvAutonomous on;
};
};
ifconfig

Code: [Select]

eth0      Link encap:Ethernet  HWaddr 00:26:22:cf:a0:ee 
          inet6 addr: 2001:470:1f0b:10b::1/64 Scope:Global
          inet6 addr: fe80::226:22ff:fecf:a0ee/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1230 errors:0 dropped:0 overruns:0 frame:0
          TX packets:129 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:157828 (157.8 KB)  TX bytes:19876 (19.8 KB)
          Interrupt:17

he-ipv6   Link encap:IPv6-in-IPv4 
          inet6 addr: fe80::c0a8:109/64 Scope:Link
          inet6 addr: 2001:470:1f0a:10b::2/64 Scope:Global
          UP POINTOPOINT RUNNING NOARP  MTU:1480  Metric:1
          RX packets:2014 errors:0 dropped:0 overruns:0 frame:0
          TX packets:16461 errors:1 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:1427099 (1.4 MB)  TX bytes:1633834 (1.6 MB)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:1695 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1695 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:281491 (281.4 KB)  TX bytes:281491 (281.4 KB)

wlan0     Link encap:Ethernet  HWaddr 00:1e:65:d0:cf:cc 
          inet addr:192.168.1.9  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::21e:65ff:fed0:cfcc/64 Scope:Link
          inet6 addr: 2001:470:1f0b:10b::/64 Scope:Global
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:23453 errors:0 dropped:0 overruns:0 frame:0
          TX packets:29423 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:17653629 (17.6 MB)  TX bytes:4297016 (4.2 MB)

Ping from connected PC to 2001:470:1f0b:10b::1 works
Ping from connected PC to 2001:470:1f0a:10b::2 works

Internet on connected PC doesn't work at all.

[cholzhauer]

lets see the interface settings (ifconfig or ipconfig) and the routing tables on your connected pc

By the way, the range you're using for RADVD...is that your routed /64 or a /64 out of your /48?

[aiv]

ifconfig

Code: [Select]

eth0      Link encap:Ethernet  HWaddr 08:00:27:02:2f:75 
          inet addr:192.168.1.10  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: 2001:470:1f0b:10b:a00:27ff:fe02:2f75/64 Scope:Global
          inet6 addr: fe80::a00:27ff:fe02:2f75/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:198 errors:0 dropped:0 overruns:0 frame:0
          TX packets:119 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:28803 (28.8 KB)  TX bytes:18741 (18.7 KB)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:308 errors:0 dropped:0 overruns:0 frame:0
          TX packets:308 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:54935 (54.9 KB)  TX bytes:54935 (54.9 KB)

route -A inet6

Code: [Select]

Kernel IPv6 routing table
Destination                    Next Hop                   Flag Met Ref Use If
2001:470:1f0b:10b::/64         ::                         UAe  256 0     0 eth0
fe80::/64                      ::                         U    256 0     0 eth0
::/0                           fe80::226:22ff:fecf:a0ee   UGDA 1024 0     1 eth0
::/0                           ::                         !n   -1  1    19 lo
::1/128                        ::                         Un   0   1     4 lo
2001:470:1f0b:10b:a00:27ff:fe02:2f75/128 ::                         Un   0   1    30 lo
fe80::a00:27ff:fe02:2f75/128   ::                         Un   0   1     0 lo
ff00::/8                       ::                         U    256 0     0 eth0
::/0                           ::                         !n   -1  1    19 lo

Both from connected PC.

I use Routed /64 on radvd conf file

[aiv]

Ping from router to 2001:470:1f0b:10b:a00:27ff:fe02:2f75 (PC address) doesn't work.

Anyone have any idea? I think it is problem on router, maybe i forgot something to add in interfaces?

BTW. i used this tutorial: https://wiki.ubuntu.com/IPv6 to set-up tunnel