• Welcome to Hurricane Electric's IPv6 Tunnel Broker Forums.


Welcome to Hurricane Electric's Tunnelbroker.net forums!

Main Menu

Windows 7 Behind a Cisco ASA-5505

Started by Dakara, March 19, 2014, 10:30:27 PM

Previous topic - Next topic


Hi Guys,

Just wanted to play around with IPv6 and as the ASA doesn't support Tunnel Interfaces, I tried on Win7 to no avail.

I have a rule in the ASA for any Internal Device to Tunnel Protocol 41 to the HE IPv4 Endpoint and I can see the Hits on this rule Increment, so the routes for Windows must be right, I just don't see any response come back?

Any help would be appreciated. If you need more info from my end, just let me know.



What commands did you run on your windows machine?
What was the rule you wrote on the ASA?


What version of the OS are you running?


Win7 commands:

netsh interface teredo set state disabled
netsh interface ipv6 add v6v4tunnel interface=IP6Tunnel (HE IPv4 Address)
netsh interface ipv6 add address IP6Tunnel 2001:470:x:x::2
netsh interface ipv6 add route ::/0 IP6Tunnel 2001:470:x:x::1

ASA is 9.1(4)

access-list Internal_access_in extended permit object Protocol_41 object tserv1.nyc4.he.net



And your object of "Protocol_41" is actually specified how, like below?

object service Protocol_41
service 41