Hurricane Electric's IPv6 Tunnel Broker Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to Hurricane Electric's Tunnelbroker.net forums!

Author Topic: how to create a ubuntu-box server ivp6  (Read 80 times)

sonbolHol

  • Newbie
  • *
  • Posts: 6
    • View Profile
how to create a ubuntu-box server ivp6
« on: February 17, 2017, 10:10:00 AM »

hi sir,
first i create the tunnel with he.net and i can ping of ipv6.google.com successfully ,
second we install the radvd "apt-get install radvd" in the file radvd.conf i write this lines
interface wlan0
{
   AdvSendAdvert on;
   prefix 2001:470:1f13:40c::/64
   {
        AdvOnLink on;
        AdvAutonomous on;
   };
};
 

and in the  /etc/sysctl.conf i add net.ipv6.conf.all.forwarding=1  and net.ipv4.ip_forward=1
to share the connection with other machines using ipv6
but i found a problem the other machines which connects to the wifi who i create just has a ipv4 addresses
can you help me please and can you send me the steps more explaining for create a wifi who share the connexion  and give addresses ipv6 automatically to the other machines connects
thanks
Logged

cholzhauer

  • Hero Member
  • *****
  • Posts: 2525
    • View Profile
Re: how to create a ubuntu-box server ivp6
« Reply #1 on: February 17, 2017, 11:43:37 AM »

Your other clients are not getting IPv6 addresses?
Logged

sonbolHol

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: how to create a ubuntu-box server ivp6
« Reply #2 on: February 18, 2017, 06:13:33 AM »

no they didn't
can you help me please and you send me the steeps more explains


thanks for fast reply
Logged

cholzhauer

  • Hero Member
  • *****
  • Posts: 2525
    • View Profile
Re: how to create a ubuntu-box server ivp6
« Reply #3 on: February 19, 2017, 05:16:38 PM »

So it sounds like you have a problem with your SLAAC setup.
Logged

sonbolHol

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: how to create a ubuntu-box server ivp6
« Reply #4 on: February 20, 2017, 11:37:50 AM »

i will explain to you my situation
i use a 3g modem which give me just a dynamic ipv4 his interface is ppp0

i create successfully a tunnel with he and i can ping ipv6.google.com

now after install radvd and configure it  in /etc/radvd.conf

interface wlan0
{
   AdvSendAdvert on;
   prefix 2001:470:1f13:40c::/64
   {
        AdvOnLink on;
        AdvAutonomous on;
   };
};

i use the wlan0 interface because i want to give a ipv6 adresses using a WIFI automatically
then i restart it sudo /etc/init.d/radvd restart

but when i create a wifi with my laptop in the clients side i just see a ipv4 adresses and no ipv6

i use this https://wiki.ubuntu.com/IPv6?action=show&redirect=IPV6#Configure_your_Ubuntu_box_as_a_IPv6_router

so i hope some one help me

i ask am i supposed to configure the wlan0 in /etc/network/interfaces
 or is that works just for the eth0 interface
Logged

cholzhauer

  • Hero Member
  • *****
  • Posts: 2525
    • View Profile
Re: how to create a ubuntu-box server ivp6
« Reply #5 on: February 20, 2017, 12:51:40 PM »

I've never used wifi...you can't use wired?
Logged