Welcome to Hurricane Electric's Tunnelbroker.net forums!
Started by ghane, March 12, 2021, 04:45:55 AM
[sanjeev@270s] > /interface 6to4 print detailFlags: X - disabled, R - running 0 R ;;; Hurricane Electric IPv6 Tunnel Broker name="sit1" mtu=1480 actual-mtu=1480 local-address=22.214.171.124 remote-address=126.96.36.199 keepalive=10s,10 dscp=0 clamp-tcp-mss=yes dont-fragment=no
[sanjeev@270s] > /ipv6 route print where dst-address=2001:470:17:11a::2/64Flags: X - disabled, A - active, D - dynamic,C - connect, S - static, r - rip, o - ospf, b - bgp, U - unreachable # DST-ADDRESS GATEWAY DISTANCE 0 ADC 2001:470:17:11a::/64 sit1 0
Quote from: tomkep on March 12, 2021, 06:21:59 AMThe first question to answer is if you can ping remote end IPv4 address: 188.8.131.52 (I can).
Quote from: tomkep on March 12, 2021, 06:21:59 AMIf it works - check your firewall settings, especially if you allow protocol 41 (IPv6 encapsulation) in your INPUT chain/table.