• Welcome to Hurricane Electric's IPv6 Tunnel Broker Forums.

Can't get an IPv6 tunnel to work on windows 7.

Started by kutagh, October 02, 2009, 11:29:37 AM

Previous topic - Next topic

cholzhauer

#15
netsh int ipv6 delete    followed by whatever you added before

jimb

I think there's a reset subcommand for most of the netsh sections.

ddasilva99

Hello,

I am also running into the same problem and I would appreciate your help getting my IPv6 tunnel working in Windows 7.  I have tried to copy/paste the commands listed when I created the tunnel and I cannot establish a link to IPv6 sites.

Could someone please provide me with steps to configure my IPv6 tunnel?

Thanks,
D

cholzhauer

What commands are you using?  Are you running them as an administrator?  Are you getting any errors?

Can you post the output of "ipconfig /all" and "netstat -nr" ?


ddasilva99

Hi Cholzhauer,

Thank you for your assistance.  Here is the information you have requested...

C:\Users\Derek\Desktop>ipconfig /all

Windows IP Configuration

   Host Name . . . . . . . . . . . . : ddasilva
   Primary Dns Suffix  . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection 2:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Hexago Virtual Multi-Tunnel Adapter
   Physical Address. . . . . . . . . : 02-50-F2-00-00-01
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2001:5c0:1000:a::139(Preferred)
   Link-local IPv6 Address . . . . . : fe80::2168:1ba5:994b:2b65%18(Preferred)
   Autoconfiguration IPv4 Address. . : 169.254.43.101(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.0.0
   Default Gateway . . . . . . . . . : ::
   DHCPv6 IAID . . . . . . . . . . . : 302141682
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-06-8D-6A-00-1D-60-2F-43-

   DNS Servers . . . . . . . . . . . : 192.168.1.1
   NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet adapter LAN:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Marvell Yukon 88E8056 PCI-E Gigabit Eth
net Controller
   Physical Address. . . . . . . . . : 00-1D-60-2F-4A-C7
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.1.1
   DNS Servers . . . . . . . . . . . : 192.168.1.1
   NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.{64E4778C-99ED-4DD1-9191-6C4EBE9E1FF4}:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes

Tunnel adapter isatap.{1A0B03CA-8761-40E3-BE2E-908625E9B009}:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes

Tunnel adapter IP6Tunnel:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft Direct Point-to-point Adapate
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes

C:\Users\Derek\Desktop>netstat -nr
===========================================================================
Interface List
18...02 50 f2 00 00 01 ......Hexago Virtual Multi-Tunnel Adapter
12...00 1d 60 2f 4a c7 ......Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Contr
oller
  1...........................Software Loopback Interface 1
15...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter
14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2
16...00 00 00 00 00 00 00 e0 Microsoft Direct Point-to-point Adapater
===========================================================================

IPv4 Route Table
===========================================================================
Active Routes:
Network Destination        Netmask          Gateway       Interface  Metric
          0.0.0.0          0.0.0.0      192.168.1.1      192.168.1.2    276
        127.0.0.0        255.0.0.0         On-link         127.0.0.1    306
        127.0.0.1  255.255.255.255         On-link         127.0.0.1    306
  127.255.255.255  255.255.255.255         On-link         127.0.0.1    306
      169.254.0.0      255.255.0.0         On-link    169.254.43.101    276
   169.254.43.101  255.255.255.255         On-link    169.254.43.101    276
  169.254.255.255  255.255.255.255         On-link    169.254.43.101    276
      192.168.1.0    255.255.255.0         On-link       192.168.1.2    276
      192.168.1.2  255.255.255.255         On-link       192.168.1.2    276
    192.168.1.255  255.255.255.255         On-link       192.168.1.2    276
        224.0.0.0        240.0.0.0         On-link         127.0.0.1    306
        224.0.0.0        240.0.0.0         On-link       192.168.1.2    276
        224.0.0.0        240.0.0.0         On-link    169.254.43.101    276
  255.255.255.255  255.255.255.255         On-link         127.0.0.1    306
  255.255.255.255  255.255.255.255         On-link       192.168.1.2    276
  255.255.255.255  255.255.255.255         On-link    169.254.43.101    276
===========================================================================
Persistent Routes:
  Network Address          Netmask  Gateway Address  Metric
          0.0.0.0          0.0.0.0      192.168.1.1  Default
===========================================================================

IPv6 Route Table
===========================================================================
Active Routes:
If Metric Network Destination      Gateway
18    276 ::/0                     On-link
  1    306 ::1/128                  On-link
18    276 2001:5c0:1000:a::/64     On-link
18    276 2001:5c0:1000:a::138/128 On-link
18    276 2001:5c0:1000:a::139/128 On-link
18    276 fe80::/64                On-link
18    276 fe80::2168:1ba5:994b:2b65/128
                                    On-link
  1    306 ff00::/8                 On-link
18    276 ff00::/8                 On-link
===========================================================================
Persistent Routes:
If Metric Network Destination      Gateway
  0 4294967295 ::/0                     2001:470:1c:1be::1
===========================================================================
netsh interface ipv6 add v6v4tunnel IP6Tunnel 206.248.129.217 216.66.38.58
netsh interface ipv6 add address IP6Tunnel 2001:470:1c:1be::2
netsh interface ipv6 add route ::/0 IP6Tunnel 2001:470:1c:1be::1 metric=5
netsh interface ipv6 set route 2001:470:1c:1be::2/64 IP6Tunnel metric=4
I am running the following batch file as administrator



cholzhauer

Do you also have access through Hexago?  I'd remove that and try again, your routing table has multiple prefix's in it, and while it shouldn't matter, we should make things as simple as possible for the time being.

ddasilva99

Hi,

Thanks for your post.  I have removed the Hexago client and the problem persists.  Would you like my me to repost my settings?

Thanks,
D

cholzhauer


ddasilva99

Hello,

Here is my IPCONFIG followed by my netstat after removing the Hexago client...


Windows IP Configuration

   Host Name . . . . . . . . . . . . : ddasilva
   Primary Dns Suffix  . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter LAN:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller
   Physical Address. . . . . . . . . : 00-1D-60-2F-4A-C7
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.1.1
   DNS Servers . . . . . . . . . . . : 192.168.1.1
   NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.{1A0B03CA-8761-40E3-BE2E-908625E9B009}:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes

Tunnel adapter IP6Tunnel:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft Direct Point-to-point Adapater
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes


===========================================================================
Interface List
12...00 1d 60 2f 4a c7 ......Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller
  1...........................Software Loopback Interface 1
14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2
16...00 00 00 00 00 00 00 e0 Microsoft Direct Point-to-point Adapater
===========================================================================

IPv4 Route Table
===========================================================================
Active Routes:
Network Destination        Netmask          Gateway       Interface  Metric
          0.0.0.0          0.0.0.0      192.168.1.1      192.168.1.2    276
        127.0.0.0        255.0.0.0         On-link         127.0.0.1    306
        127.0.0.1  255.255.255.255         On-link         127.0.0.1    306
  127.255.255.255  255.255.255.255         On-link         127.0.0.1    306
      192.168.1.0    255.255.255.0         On-link       192.168.1.2    276
      192.168.1.2  255.255.255.255         On-link       192.168.1.2    276
    192.168.1.255  255.255.255.255         On-link       192.168.1.2    276
        224.0.0.0        240.0.0.0         On-link         127.0.0.1    306
        224.0.0.0        240.0.0.0         On-link       192.168.1.2    276
  255.255.255.255  255.255.255.255         On-link         127.0.0.1    306
  255.255.255.255  255.255.255.255         On-link       192.168.1.2    276
===========================================================================
Persistent Routes:
  Network Address          Netmask  Gateway Address  Metric
          0.0.0.0          0.0.0.0      192.168.1.1  Default
===========================================================================

IPv6 Route Table
===========================================================================
Active Routes:
If Metric Network Destination      Gateway
  1    306 ::1/128                  On-link
  1    306 ff00::/8                 On-link
===========================================================================
Persistent Routes:
If Metric Network Destination      Gateway
  0 4294967295 ::/0                     2001:470:1c:1be::1
===========================================================================

broquea

And when you run the netsh commands, you use 192.168.1.2 as your local IPv4 address instead of what the example will provide using your IPv4 endpoint?

ddasilva99

Hello,

Here is the command I am running...

netsh interface ipv6 add v6v4tunnel IP6Tunnel xxx.xxx.xxx.xxx 216.66.38.58
netsh interface ipv6 add address IP6Tunnel 2001:470:1c:1be::2
netsh interface ipv6 add route ::/0 IP6Tunnel 2001:470:1c:1be::1 metric=5
netsh interface ipv6 set route 2001:470:1c:1be::2/64 IP6Tunnel metric=4

Where XXX.XXX.XXX.XXX is the WAN IP

Thanks,
D

broquea

And is that WAN IP configured on your machine?

Going to say no here since you provided ipconfig data which shows that 192.168.1.2 is.

Run the netsh command with that instead of the WAN IP.

ddasilva99

#27
Thank you for your assistance.  After setting the "WAN IP" to 192.168.1.2 all functionality was restored.
Please note I had to delete my existing IPv6Tunnel using the netsh delete before adding the proper netsh command with 192.168.1.2

Is there a way to automatically update the WAN IP on the website everytime my IP changes?

brianko

OK, I think I really hosed things up.

Trying to reset all my IPv6 setting to defaults, but I'm not having much luck with the netsh reset command.  Now when I try to go back through the setup steps, I get this error:

C:\Windows\system32>netsh interface ipv6 add v6v4tunnel IP6Tunnel xx.xx.xx.xx yy.yy.yy.yy

You were not connected because a duplicate name exists on the network. If joinin
g a domain, go to System in Control Panel to change the computer name and try ag
ain. If joining a workgroup, choose another workgroup name.

How can I get everything back to the way it was so I can try again?

cholzhauer