• Welcome to Hurricane Electric's IPv6 Tunnel Broker Forums.

can't create a regular tunnel

Started by otherwise777, November 07, 2009, 01:50:09 PM

Previous topic - Next topic

otherwise777

when im trying to create a regular tunnel i get this:
Error: Your IPv4 endpoint is unreachable or unstable. Please make sure ICMP is not blocked.
so i went into my router and turned the icmp on,
i turned my own firewall off, but i still get the same error message

is there anything i can do to help it?

cholzhauer

did you try a packet capture to see what was going on?  what os?  do you have access to another computer to test?

otherwise777

Quote from: cholzhauer on November 07, 2009, 02:56:12 PM
did you try a packet capture to see what was going on?  what os?  do you have access to another computer to test?

yes i tested it on my laptop as well
OS is windows 7

and a packet capture?

cholzhauer

Packet capture...run something like Wireshark to see what packets are making it to your machine.

What's the IP you're trying to ping?  If you don't want to post it, you can send it to me in a private message.

otherwise777

Quote from: cholzhauer on November 08, 2009, 06:35:00 AM
Packet capture...run something like Wireshark to see what packets are making it to your machine.

What's the IP you're trying to ping?  If you don't want to post it, you can send it to me in a private message.

83.82.28.32

this is my ip, and it won't ping

the problem is my router, because when im directly on my modem i can create a tunnel
but when im connected trhough my router i can't create a regular tunnel

cholzhauer

Does your router have a DMZ area?  You could assign your computer to that.

Or, try and forward all pings to your computer