Need help with Server 2003

[oyvind]

Hi

Server 2003 in a workgroup can`t access Internet with IPv6.
All other workstations with OS XP and Win7 works automatic in VLAN10.


Ping output from server 2003 :

Pinging ipv6.l.google.com [2a00:1450:8007::93] from fe80::21b:fcff:fef9:b711%5 w
ith 32 bytes of data:

Destination host unreachable.
Destination host unreachable.
Destination host unreachable.

Equipment is Cisco 1812w and Cisco 2950 with 4 VLAN`s.
Also tested without Zone based policy firewall.

interface FastEthernet0
description ISP-connect
bandwidth 15000
ip address dhcp
ip nbar protocol-discovery
ip nat outside
no ip virtual-reassembly in
zone-member security INTERNET
duplex auto
speed auto
ipv6 enable
no cdp enable
crypto map CRYDYN
service-policy input mark_qos
no routing dynamic


ipv6 unicast routing is enabled
ipv6 route ::/0 Tunnel0

interface Tunnel0
description Hurricane Electric IPv6 Tunnel Broker
no ip address
zone-member security INTERNET
ipv6 address 2001:470:27:667::2/64
ipv6 enable
tunnel source 81.167.x.x
tunnel mode ipv6ip
tunnel destination 216.66.80.x

This is the VLAN with server 2003 :

Show run output from VLAN 300

interface Vlan300
ip address 192.168.30.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
zone-member security PRIVATE
ipv6 address 2001:470:27:669::3/64
ipv6 enable
service-policy input trust_qos
service-policy output mark_qos

Box#sh ipv6 int vlan 300
Vlan300 is up, line protocol is up
  IPv6 is enabled, link-local address is FE80::21B:D5FF:FE33:C07C
  No Virtual link-local address(es):
  Global unicast address(es):
    2001:470:27:669::3, subnet is 2001:470:27:669::/64
  Joined group address(es):
    FF02::1
    FF02::2
    FF02::1:FF00:3
    FF02::1:FF33:C07C
  MTU is 1500 bytes
  ICMP error messages limited to one every 100 milliseconds
  ICMP redirects are enabled
  ICMP unreachables are sent
  Input features: QoS classify QoS actions
  Output features: CCE Classification Zone based Firewall QoS classify QoS actions
  Post_Encap features: QoS Actions
  Service-policy input: trust_qos
  Service-policy output: mark_qos
  ND DAD is enabled, number of DAD attempts: 1
  ND reachable time is 30000 milliseconds (using 30000)
  ND advertised reachable time is 0 (unspecified)
  ND advertised retransmit interval is 0 (unspecified)
  ND router advertisements are sent every 200 seconds
  ND router advertisements live for 1800 seconds
  ND advertised default router preference is Medium
  Hosts use stateless autoconfig for addresses.

-------------------------------------------------------------------

This is the VLAN with XP and Win7 (working) :

Show run int vl 10 output

interface Vlan10
ip address 192.168.10.1 255.255.255.0
ip nat inside
no ip virtual-reassembly in
zone-member security PRIVATE
ipv6 address 2001:470:28:667::1/64
ipv6 enable
ipv6 mobile home-agent
service-policy input trust_qos
service-policy output mark_qos

Box#sh ipv6 int vlan 10
Vlan10 is up, line protocol is up
  IPv6 is enabled, link-local address is FE80::21B:D5FF:FE33:C07C
  No Virtual link-local address(es):
  Global unicast address(es):
    2001:470:28:667::1, subnet is 2001:470:28:667::/64
  Joined group address(es):
    FF02::1
    FF02::2
    FF02::1:FF00:1
    FF02::1:FF33:C07C
  MTU is 1500 bytes
  ICMP error messages limited to one every 100 milliseconds
  ICMP redirects are enabled
  ICMP unreachables are sent
  Input features: QoS classify QoS actions
  Output features: CCE Classification Zone based Firewall QoS classify QoS actions
  Post_Encap features: QoS Actions
  Service-policy input: trust_qos
  Service-policy output: mark_qos
  ND DAD is enabled, number of DAD attempts: 1
  ND reachable time is 30000 milliseconds (using 30000)
  ND advertised reachable time is 0 (unspecified)
  ND advertised retransmit interval is 0 (unspecified)
  ND router advertisements are sent every 200 seconds
  ND router advertisements live for 1800 seconds
  ND advertised default router preference is Medium
  Hosts use stateless autoconfig for addresses.


Thank you

Øyvind

[cholzhauer]

Pinging ipv6.l.google.com [2a00:1450:8007::93] from fe80::21b:fcff:fef9:b711%5 w

It's not getting a global address...I haven't looked real close at your config yet, but what's different between that subnet and that ones that are working?

[oyvind]

The config is identical, just different IPv4 subnets.

[oyvind]

The IPv6 source address on Interface VLAN 10 2001:470:28:667::1/64 can ping adresses on Internet, but not the source address 2001:470:27:669::3/64 on VLAN 300.
It seem that problem is on the router . Any ideas ?
These IPv6 addresses is manually assigned by me.

[jimb]

Is this a routed /48?  If not, you can only have one LAN /64.  If you want more than one LAN terminated to the same router you need a /48.

If you have two separate tunnels to each router, then you'll get a separate /64 for each.  But only one /64.

[cholzhauer]

Yeah, something's wrong with your address scheme

...
Global unicast address(es):
    2001:470:27:669::3, subnet is 2001:470:27:669::/64
...
interface Tunnel0
description Hurricane Electric IPv6 Tunnel Broker
no ip address
zone-member security INTERNET
ipv6 address 2001:470:27:667::2/64

If you were using your routed /64, it's only one character away from your tunnel IP.  If you were using your /48, it wouldn't even be close to the same address.  Better double check something.

[oyvind]

Do this mean 48 bit mask on the tunnel and the Interface VLAN`s  or only on the tunnel interface ?
Thank you.

[cholzhauer]

Neither...you have to take /64's out of your /48 and use those for your vlans

You shouldn't be writing "/48" anywhere in your configurations