Hurricane Electric's IPv6 Tunnel Broker Forums

Advanced search  

News:

Welcome to Hurricane Electric's Tunnelbroker.net forums!

Author Topic: [SPLIT] Re: Hardware that supports Protocol 41 Tunnels out of the box  (Read 11868 times)

arcticfire

  • Newbie
  • *
  • Posts: 14

We are looking to compile a list of firewall/CPE devices that by default (With no major changes except maybe a firmware update) support IPv6 over IPv4 tunnels. (Protocol 41 tunneling).

If you are passing your tunnel over a commercial firewall to terminate on a machine behind it, then please let us know what version hardware and firmware you are having success with.

So far we have tested in house:

# Linksys WRT54G firmware 4.21.2
# Linksys WRT54GL firmware 4.30.7 & 4.30.11
# D-Link DGL-4100 firmware 1.6 & 1.7

All of which work.
 
I might have set something up wrong. My WRT54g has firmware version 4.21.1 (not that much of a difference) and my tunnel doesn't work. Here are the commands I used on my windows machine as instructed by the tunnel info page.

Code: [Select]
ipv6 install
ipv6 rtu ::/0 2/::209.51.161.14 pub
ipv6 adu 2/2001:470:1f06:6c5::2
« Last Edit: July 28, 2008, 09:44:42 AM by broquea »
Logged

broquea

  • Sr. Network Engineer, HE.NET AS6939
  • Administrator
  • Hero Member
  • *****
  • Posts: 1720

Have you tried updating the firmware?
Logged

tufinhas

  • Newbie
  • *
  • Posts: 29

try with Vista/2008 commands
and replace your public ip with your local ip

Quote
*NOTE* When behind a firewall appliance that passes protocol41, instead of using the IPv4 endpoint you provided to our broker, use the IPv4 address you get from your appliance's DHCP service.
Logged

arcticfire

  • Newbie
  • *
  • Posts: 14
Re: [SPLIT] Re: Hardware that supports Protocol 41 Tunnels out of the box
« Reply #3 on: August 01, 2008, 05:38:21 PM »

That was it. I was using my public IP instead of my local IP. But anyway, I got it working with DD-WRT, so no worries here.
Logged

lasfulop

  • Newbie
  • *
  • Posts: 7
Re: [SPLIT] Re: Hardware that supports Protocol 41 Tunnels out of the box
« Reply #4 on: January 26, 2011, 01:51:50 PM »

We are looking to compile a list of firewall/CPE devices that by default (With no major changes except maybe a firmware update) support IPv6 over IPv4 tunnels. (Protocol 41 tunneling).

If you are passing your tunnel over a commercial firewall to terminate on a machine behind it, then please let us know what version hardware and firmware you are having success with.

So far we have tested in house:

# Linksys WRT54G firmware 4.21.2

All of which work.
 

I am trying to set up a tunnel as well. I have a Linksys WRT54G router, everything seems fine according to HE technical support so either the router doens't support protocol 41 or my ISP. But my router's firmware is v1.02.8. And this is  Linksys WRT54G ver 6. The version could mean anything? For this router this is the latest version of firmware.
Logged

cholzhauer

  • Hero Member
  • *****
  • Posts: 2702
Re: [SPLIT] Re: Hardware that supports Protocol 41 Tunnels out of the box
« Reply #5 on: January 27, 2011, 06:09:06 AM »

Did you place the host in the DMZ? Turn the firewall off?

Gonna need some more info
Logged

vivow

  • Newbie
  • *
  • Posts: 16
Re: [SPLIT] Re: Hardware that supports Protocol 41 Tunnels out of the box
« Reply #6 on: January 27, 2011, 10:43:19 AM »

We are looking to compile a list of firewall/CPE devices that by default (With no major changes except maybe a firmware update) support IPv6 over IPv4 tunnels. (Protocol 41 tunneling).

If you are passing your tunnel over a commercial firewall to terminate on a machine behind it, then please let us know what version hardware and firmware you are having success with.

So far we have tested in house:

# Linksys WRT54G firmware 4.21.2

All of which work.
 

I am trying to set up a tunnel as well. I have a Linksys WRT54G router, everything seems fine according to HE technical support so either the router doens't support protocol 41 or my ISP. But my router's firmware is v1.02.8. And this is  Linksys WRT54G ver 6. The version could mean anything? For this router this is the latest version of firmware.

I too have the WRT54G router and all my tries gettin that thing to work failed (even DMZ and turning off all firewalls). In the end I had to connect the laptop directly to the modem.
But since you have a flashable version of the router, you could look out for the alternative firmwares ddwrt and open wrt. Both of them allow IPv6 tunneling.
Logged

lasfulop

  • Newbie
  • *
  • Posts: 7
Re: [SPLIT] Re: Hardware that supports Protocol 41 Tunnels out of the box
« Reply #7 on: January 28, 2011, 09:31:44 PM »

Did you place the host in the DMZ? Turn the firewall off?

Gonna need some more info
I tried everything, I think. Firewall turned off. Host in the DMZ. I saw others saying that it didn't work placing the host in dmz, so I have to call my ISP or use some 3rd party firmware on my router.
Logged