Hurricane Electric's IPv6 Tunnel Broker Forums

Advanced search  

News:

Welcome to Hurricane Electric's Tunnelbroker.net forums!

Author Topic: Netgear WDNR3700 V3 aka Netgear N600 - No HE Tunnel Support  (Read 6522 times)

lfoothome

  • Newbie
  • *
  • Posts: 14
Netgear WDNR3700 V3 aka Netgear N600 - No HE Tunnel Support
« on: January 15, 2012, 06:45:10 PM »
This unit advertises being IPv6 capable on the box, but I just confirmed with Netgear Tech Support that it cannot serve as an HE Tunnel Endpoint. With OOB firmware.  When I get my Linksys "unbricked" I am going to try other linux based firmware on it and see if it can be a tunnel endpoint.

« Last Edit: January 15, 2012, 06:54:35 PM by lfoothome »
Logged

adiblol

  • Newbie
  • *
  • Posts: 6
Re: Netgear WDNR3700 V3 aka Netgear N600 - No HE Tunnel Support
« Reply #1 on: January 16, 2012, 07:53:02 AM »
Don't you have CLI access on it?

You can also use 6to4 - HE.net advertises 192.88.99.1 so there is some chance that you will use HE's tunnel with 6to4.
Logged

lfoothome

  • Newbie
  • *
  • Posts: 14
Re: Netgear WDNR3700 V3 aka Netgear N600 - No HE Tunnel Support
« Reply #2 on: January 16, 2012, 01:42:28 PM »
The only Out of Box access to the WDNR3700 V3 is via the routers webpage, cli is not an option.
Logged